Name: European Space Thermal Engineering Workshop 2019
Start: 2019-10-08T08:30:00+02:00
End: 2019-10-10T20:00:00+02:00
Location: ESA/ESTEC

Monday, October 7, 2019
Tuesday, October 8, 2019

8:45 AM Registration
Registration
8:45 AM - 9:45 AM
Room: Newton
9:45 AM Opening - Harrie Rooijackers (ATG-Europe)
Opening
- Harrie Rooijackers (ATG-Europe)
9:45 AM - 9:55 AM
Room: Newton
9:55 AM ESA Missions and Thermal Technology Development Outlook - Stéphane Lapensee (ESA)
ESA Missions and Thermal Technology Development Outlook
- Stéphane Lapensee (ESA)
9:55 AM - 10:35 AM
Room: Newton
10:35 AM Coffee Break
Coffee Break
10:35 AM - 11:00 AM
11:00 AM
11:00 AM - 1:00 PM
Room: Newton
Contributions

11:00 AM MetOp-SG SCA Instrument Thermal Design and Verification - José María Garcia Garrido (Airbus Defence and Space S.a.U. Spain) Ulrich Rauscher (Airbus Defence and Space GmbH)

11:30 AM Thermal design and thermal verification tests of the Solar Orbiter Heat Shield - Claudio Damasio (ESA/ESTEC)

12:00 PM Thermal Design, Analysis and Validation Plan of the Thermal Architecture for the SMILE Satellite Payload Module - Lorena Del Amo Martin (Airbus)

12:30 PM The ATHENA Spacecraft - Thermal Design aspects - Moritz Branco (ESA)
1:00 PM Lunch
Lunch
1:00 PM - 2:00 PM
2:00 PM
2:00 PM - 4:00 PM
Room: Newton
Contributions

2:00 PM Application and Testing of Self-Limiting Heaters for Satellite Thermal Control - Ulrich Rauscher (Airbus Defence and Space GmbH)

2:30 PM ADMATIS radiators and MLI: from development and qualification to flight - János SZŐKE (ADMATIS) Romain PEYROU-LAUGA (ESA)

3:00 PM Thermal Control Louvers application using Rosetta heritage - ISABEL SOTO (SENER Aeroespacial)

3:30 PM Two phase - Mechanically Pumped Loop (MPL) development - Alain CHAIX (Thales Alenia Space)
4:00 PM Coffee Break
Coffee Break
4:00 PM - 4:20 PM
4:20 PM
4:20 PM - 6:10 PM
Room: Newton
Contributions

4:20 PM Methods to Improve Thermal Test Efficiency (MITTE) - Matthieu Rodriguez (Airbus DS)

4:50 PM Simulations of formation flying maneuvers of two spacecraft in ESATAN-TMS based on the development of a MATLAB/Simulink tool for defining the required inputs. - Pedro José Herráiz Alijas (SENER Aeroespacial) Natalia de Burgos (SENER Aeroespacial)

5:20 PM Flight correlation and characterisation of Sentinel-2A/B satellite thermal behavior - Martin Altenburg (Airbus)

5:45 PM Flight correlation and characterisation of Sentinel-2A/B MSI instrument thermal behavior - ARNAUD LEMOINE (AIRBUS)
6:10 PM Cocktail
Cocktail
6:10 PM - 7:30 PM
Wednesday, October 9, 2019
9:00 AM
9:00 AM - 10:30 AM
Room: Newton 1
Contributions

9:00 AM On-orbit Experiment of Oscillating Heat Pipe and Loop Heat Pipe - Atsushi Okamoto (JAXA)

9:30 AM Development of a Novel Positive Displacement Pump for Mechanically Pumped Loops - Charlton Castro (AVS Added Value Solutions)

10:00 AM Minimising Temperature Gradients Within an Optical Support Plate Using Active Thermal Control - Edward Nelson (Argotec)
9:00 AM - 10:30 AM
Room: Newton 2
Contributions

9:00 AM Parametrisation of a Thermal Model with ESATAN Thermal Modelling Suite - Krzysztof Domanski (ITP Aero)

9:30 AM Systema-Thermica - Mathieu Lepilliez (Airbus Defence & Space)

10:00 AM Post-processing of Thermal Model Data with ESATAN Thermal Modelling Suite - James McIntosh (ITP Aero)
10:30 AM Coffee Break
Coffee Break
10:30 AM - 11:00 AM
11:00 AM
11:00 AM - 1:00 PM
Room: Newton 2
Contributions

11:00 AM Toward The Integration of Aero-Thermodynamics and Space Debris Re-entry Capabilities within ESATAN-TMS - Alessandro Falchi (AVIO)

11:30 AM Development and verification of a linear conductor generator with different triangle calculation methods - Jan Philipp Moeller (FH Aachen - University of applied Sciences)

12:00 PM TROPICS: An interface between OCDT and ThermiCalc for accelerated thermal design - Tobias Flecht (PTScientists GmbH) Marcel Scherrmann (PTScientists GmbH)

12:30 PM MetOp SG MWI On Ground Calibration Targets: thermal analysis, design and development - Davide Rizzo (OHB Italia S.p.A.)
11:00 AM - 1:00 PM
Room: Newton 1
Contributions

11:00 AM A synthesis of 3D MLI efficiency test in ESTEC Thermal Lab - Romain PEYROU-LAUGA (ESA)

11:30 AM HGAMA SOLAR SIMULATION TEST - Ander Pereda (SENER AEROESPACIAL)

12:00 PM Contact conductance of copper based brush thermal connections - Katja Janzer (ESA)

12:30 PM SAOCOM 1A TVAC and a low-power/hi-sensitivity thermal case study - Lucas Cubau (INVAP S.E.)
1:00 PM Lunch
Lunch
1:00 PM - 2:00 PM
2:00 PM
2:00 PM - 4:00 PM
Room: Newton 2
Contributions

2:00 PM A Modular Approach to Thermal Modelling of CubeSats in ESATAN-TMS - Arne te Nijenhuis (NLR - Royal Netherlands Aerospace Centre)

2:30 PM Modular Parallel Micro Pump for Adaptive Thermal Control of CubeSats - Ramon van den Berg (NLR)

3:00 PM Radiative Surface Properties of a Trihedral Array for Lunar Thermal Control Applications - Colin Butler (University of Limerick)

3:30 PM The Application of a Thermal Mathematical Model during Lander Operations on the surfaces of Small Bodies - Michael Maibaum (German Aerospace Center)
2:00 PM - 2:30 PM
Room: Newton 1
Contributions

2:00 PM Sentinel-1 thermally activated Separation Bracket - Arne Sauer (Airbus Defence and Space GmbH)
2:30 PM
2:30 PM - 4:00 PM
Room: Newton 1
Contributions

2:30 PM Flexible External Insulation (FEI) at ArianeGroup Bremen Development - Qualification and Application - Nihan Özerson-Yücel (ArianeGroup)

3:00 PM Development of Variable Emissivity Coating for Thermal Control - Jean-Paul Dudon (Thales Alenia Space)
4:00 PM Coffee Break
Coffee Break
4:00 PM - 4:30 PM
4:30 PM
4:30 PM - 6:00 PM
Room: Newton 1
Contributions

4:30 PM Compact and lightweight two-phase pumped cooling system with 3D printed aluminium components - Henk Jan van Gerner (NLR)

5:00 PM Medium LHP state of the art - Typhaine Coquard (airbus defence and space)

5:30 PM A Separable Loop Heat Pipe for Cooling a Pressurised Cargo Module - Edward Nelson (Argotec)
4:30 PM - 6:00 PM
Room: Newton 2
Contributions

4:30 PM Challenges implementing a stratospheric balloon ascent phase in ESATAN-TMS - David González-Bárcena (Universidad Politécnica de Madrid (IDR/UPM)) Javier Piqueras (Universidad Politécnica de Madrid)

5:00 PM Machine learning algorithms to develop predictive thermal tools for spacecraft simulations - Christian Semler (Maya HTT)

5:30 PM First steps of numerical simulation using Artificial Intelligence - Vincent Vadez (Dorea) Pierre Alliez (INRIA Sophia Antipolis)
6:00 PM Dinner
Dinner
6:00 PM - 9:00 PM
Thursday, October 10, 2019
9:00 AM
9:00 AM - 10:00 AM
Room: Newton
Contributions

9:00 AM JUICE (Jupiter Icy Moon Explorer) Instruments thermal control and interface - Romain Peyrou-Lauga (ESA)

9:30 AM Solution flexibility of HiPeR flexible radiators - Niels van der Pas (Airbus Defence and Space Netherlands)
10:00 AM
10:00 AM - 11:00 AM
Room: Newton
Contributions

10:00 AM Thermo-elastic test as part of ESA activity: Improvement of methodologies for thermo-elastic predictions and verification - Benoit Laine (ESA)

10:30 AM Correlation of a Thermal Model for Thermo-Elastic Distortion Predictions - Kimberly Rutherford (ESA)
11:00 AM Coffee Break
Coffee Break
11:00 AM - 11:30 AM
11:30 AM
11:30 AM - 1:00 PM
Room: Newton
Contributions

11:30 AM Guidelines for accurate thermo-elastic analysis - Alexander van Oostrum (ATG Europe)

12:00 PM SINAS Made Simple - James Etchells (ESA) Simon Appel (ATG Europe for ESA)

12:30 PM SINAS: Benefits and points of attention - Alexander van Oostrum (ATG Europe)
1:00 PM Closure - Harrie Rooijackers (ATG-Europe)
Closure
- Harrie Rooijackers (ATG-Europe)
1:00 PM - 1:05 PM
Room: Newton
1:05 PM Lunch
Lunch
1:05 PM - 2:00 PM