Name: ATD3 Workshop 2024
Start: 2024-06-06T07:30:00+02:00
End: 2024-06-07T17:30:00+02:00
Location: ESTEC Newton 1&2

ATD3 Workshop 2024

from Thursday, 6 June 2024 (07:30) to Friday, 7 June 2024 (17:30)

Monday, 3 June 2024
Tuesday, 4 June 2024
Wednesday, 5 June 2024
Thursday, 6 June 2024

08:30 Registration

08:30 - 09:50
Room: Newton

Welcome Coffee
Welcome Coffee
08:30 - 09:50
Room: Newton
09:50 ATD3 Workshop Opening: Welcome and Opening Speeches
09:50 - 10:20
Room: Newton
Contributions

09:50 ATD3 Workshop Opening: ESA Welcome and Opening Speeches
10:20 Modelling, Simulation and Tools: Destructive Re-entry Tools
Destructive Re-entry Tools
10:20 - 11:40
Room: Newton
Contributions

10:20 Development of an Enhanced Spacecraft Fragmentation Code - Federico Bariselli (von Karman Institute for Fluid Dynamics)

10:40 PAMPERO High Fidelity - Eddy Constant (R.Tech) Iko Midani (R.Tech) MARTIN SPEL (RTECH) Pierre Van Hauwaert (R.Tech)

11:00 Re-entry Track of the Shape Effects study - Final Presentation - Tobias Lips (HTG)
11:40 ATD3 Workshop 2024 Group Photo

11:40 - 11:45
Room: Newton

11:45 Coffee & Networking Break
Coffee & Networking Break
11:45 - 12:10
Room: Newton
12:10 Modelling, Simulation and Tools: Destructive Re-entry Tools
Destructive Re-entry Tools
12:10 - 13:10
Room: Newton
Contributions

12:10 Extending a GPU Optimised CFD Code to Demise Applications - Oliver Gloth (enGits GmbH)

12:30 Deep-learning Neural Networks for predicting aerothermodynamic loads during atmospheric re-entry - Julie Graham

12:50 Multifidelity-based Monte Carlo methods applied to the uncertainty quantification of a re-entry test case - Tommy Williamson (University of Strathclyde Aerospace Centre for Excellence)
13:10 Lunch Break
Lunch Break
13:10 - 14:10

14:10 ESA - Zero Debris Approach

14:10 - 14:25
Room: Newton
14:25 Modelling, Simulation and Tools: Destructive Re-entry Tools
Destructive Re-entry Tools
14:25 - 14:45
Room: Newton
Contributions

14:25 Extension of DRAMA via Post-Processing Tools - Alan Flinton (Fluid Gravity Engineering Ltd)
14:45 Modelling, Simulation and Tools: Fragmentation, Ablation Phenomena
Fragmentation, Ablation Phenomena
14:45 - 15:45
Room: Newton
Contributions

14:45 Dynamic fragmentation using phase-field modelling of fracture - Shad Durussel (Ecole Polytechnique Fédérale de Lausanne)

15:05 Coupling aerothermodynamic and material response modelling for detection of destructive re-entries - Catarina Garbacz (University of Strathclyde)

15:25 Effect of Ablation on Laminar-Turbulent Transition over a Compression Ramp at Mach 8 - Ata Baskaya (Aerodynamics Group, Faculty of Aerospace Engineering, TU Delft, The Netherlands)
15:45 Coffee & Networking Break
Coffee & Networking Break
15:45 - 16:15
Room: Newton
16:15 Modelling, Simulation and Tools: Fragmentation, Ablation phenomena
Fragmentation, Ablation phenomena
16:15 - 16:35
Room: Newton
Contributions

16:15 Modeling, numerical strategies and simulations of ablation by melting for critical space debris materials - David Henneaux (Cenaero)
16:35 Re-entry Missions
16:35 - 17:10
Room: Newton
Contributions

16:35 DRACO mission: development status and scientific return - Beatriz Jilete (ESA)

16:55 Filling the knowledge gap of HEO Re-entry: the CLUSTER-II case. - Silvia Sanvido (ESA)
17:10 Test Case Collaboration Campaign: Numerical rebuild of the DELTA-II second stage re-entry
Numerical rebuild of the DELTA-II second stage re-entry
17:10 - 18:00
Room: Newton
Contributions

17:10 SAMj & DRAMA Assessment of the Delta II Upper Stage ATD3 Test Campaign - Ian Holbrough (Belstead Research Limited)

17:20 Impact of multi-fidelity approaches on the simulation of atmospheric re-entry: the Delta-II second stage re-entry - ATD3 Test Campaign - Julie Graham

17:30 Delta-II flight rebuilding with PAMPERO - ATD3 Test Campaign - Eddy Constant (R.Tech)

17:40 SCARAB Numerical rebuilding Delta II Second Stage re-entry - ATD3 Test Campaign - Tobias Lips (HTG)

17:50 Q&A
18:00 DAY 1 Closure

18:00 - 18:05
Room: Newton

18:05 Test Case Collaboration Campaign: Numerical rebuild of the DELTA-II second stage re-entry (restricted participation)
Numerical rebuild of the DELTA-II second stage re-entry (restricted participation)
18:05 - 19:00
Room: Newton

19:30 Networking Dinner
Networking Dinner
19:30 - 23:00
Friday, 7 June 2024

08:30 Coffee & Networking Break
Coffee & Networking Break
08:30 - 09:30
Room: Newton

Test Case Collaboration Campaign: Interference of a Free-flying Ring with a Stationary Cylinder (restricted participation)
Interference of a Free-flying Ring with a Stationary Cylinder (restricted participation)
08:30 - 09:30
Room: Newton

09:30 Introduction- DAY 2

09:30 - 09:35
Room: Newton
09:35 Experimental Data and Numerical Simulations
09:35 - 10:35
Room: Newton
Contributions

09:35 Re-entry demise investigation of critical CubeSat components in plasma wind tunnel experiments - Clemens Kaiser (University of Stuttgart, Institute of Space Systems)

09:55 Thermite-for-Demise (T4D): Experiments and numerical modelling on solar array drive mechanism mock-ups containing thermite in an arc-heated wind tunnel - Alessandro Finazzi (Politecnico di Milano)

10:15 Demise study of miniaturized and representative Composite Overwrapped Pressure Vessels (COPV): Plasmatron experimental testing and high-fidelity simulations - Pierre Schrooyen (von Karman Institute for Fluid Dynamics)
10:35 Experimental Data, Studies, and Capabilities
10:35 - 10:55
Room: Newton
Contributions

10:35 Investigations of Gas-Surface Interactions and Ablation Phenomena by Molecular Beam Methods - Timothy Minton (University of Colorado Boulder)
10:55 Modelling, Simulation and Tools
10:55 - 11:15
Room: Newton
Contributions

10:55 Drag and O-atom Exposure Modeling for Satellites in Very Low Earth Orbit - Tom Schwartzentruber (University of Minnesota)
11:15 Coffee & Networking Break
Coffee & Networking Break
11:15 - 11:40
Room: Newton
11:40 Experimental Data, Studies, and Capabilities
11:40 - 12:40
Room: Newton
Contributions

11:40 Separation Studies on Sphere and Cube Clusters in Mach 12 Flow - Dániel Gábor Kovács (von Karman Institute for Fluid Dynamics / University of Liège)

12:00 Experimental Characterization of Spectrographic Response of Break-up Fragments in Plasma Wind Tunnel Flows - Johannes W. Oswald (Institute of Space Systems, University of Stuttgart)

12:20 Assessment of Destructive Testing for Space Debris in Ground Facilities - Olivier Chazot (VKI)
12:40 Experimental Data, Studies, and Capabilities: Material Characterization
Material Characterization
12:40 - 13:00
Room: Newton
Contributions

12:40 Characterization of TA6V alloy oxidized by air plasma in inductively coupled plasma torch - Adrien Brault (CORIA)
13:00 Lunch Break
Lunch Break
13:00 - 14:00
14:00 Experimental Data, Studies, and Capabilities: Material Characterization
Material Characterization
14:00 - 14:40
Room: Newton
Contributions

14:00 Supersonic off-stagnation point test bed for high-enthalpy material testing in Plasmatron - Bernd Helber (von Karman Institute for Fluid Dynamics)

14:20 Behavior of layered demisable spacecraft materials in harsh environment - Pranav Vivek Kulkarni (Tribology and Interfacial Chemistry (TIC) Group, École polytechnique fédérale de Lausanne (EPFL), Lausanne, 1015, Switzerland)
14:40 Experimental Data, Studies, and Capabilities
14:40 - 14:55
Room: Newton
Contributions

14:40 Demisability of Platform Optics and Electronics - State of Art - Marco Papa (ESA)
14:55 Re-entry Missions
14:55 - 15:15
Room: Newton
Contributions

14:55 Overview of the KREPE-2 re-entry mission - Alexandre Martin (University of Kentucky)
15:15 Modelling, Simulation and Tools
15:15 - 15:35
Room: Newton
Contributions

15:15 Passive devices for safe deorbiting and reentry of spent upper stages - REMOTE - Dmitry Sizov (Nazarbayev University)
15:35 Workshop Closure: Conclusions
Conclusions
15:35 - 15:50
Room: Newton

15:50 Coffee & Networking Break
Coffee & Networking Break
15:50 - 16:20
Room: Newton

Choose timezone