Name: Clean Space Industrial Days & AeroThermoDynamics Design for Demise Workshop
Start: 2017-10-24T08:00:00+00:00
End: 2017-10-26T19:00:00+00:00
Location: ESTEC

Monday 23 October 2017
Tuesday 24 October 2017
09:00 Welcome and Openings
Welcome and Openings
09:00 - 11:00
Room: High Bay
Contributions

09:00 Opening Speech

09:20 Market for ADR - Alberto Accogli (Leoni Coporate Advisors)

09:45 Critical raw materials and their role in the European aerospace and energy sectors - Evangelos Tzimas (European Commision - DG Joint Research Centre)

10:10 Space Debris Mitigation implementation in Earth Observation Missions - Guido Levrini (ESA)

10:35 Clean Space overview - Luisa Innocenti (ESA)
11:00 Coffee break
Coffee break
11:00 - 11:30
Room: Erasmus building
11:30 Technology priorities for Integrators
Technology priorities for Integrators
11:30 - 13:00
Room: Auditorium
Contributions

11:30 Large System Integrator SDM technology priorities - Daniel Briot (ADS) Gerrit Proffe (OHB System AG) Lilith Grassi (TAS)

12:10 Technology priorities for small satellites - Peter Holsters (QinetiQ)

12:30 Ariane 6 approach and solutions regarding space debris mitigation - Nathalie Dias (Ariane Group)
Environmental Impact of Space missions
Environmental Impact of Space missions
11:30 - 13:00
Room: Multimedia library
Contributions

11:30 EcoDesign at ESA - Sara Morales Serrano (ESA)

11:50 LCA of launchers environmental impact - Augustin Chanoine (Deloitte)

12:10 LCA of satellites environmental impact - Augustin Chanoine (Deloitte)

12:30 Question & Answers
System
System
11:30 - 13:00
Room: High Bay
Contributions

11:30 e.Deorbit & SSV - Robin Biesbroek (ESA)

11:50 Results of the Airbus DS led e.Deorbit Phase B1 ESA study - Stéphane Estable (Airbus)

12:10 Space Debris Attitude Motion Measurements and Modelling, ENVISAT Case - Jiri Silha (University of Bern)

12:30 Final Pre-Flight Update for the Remove Debris ADR Mission - Jason Forshaw
13:00 Lunch break
Lunch break
13:00 - 14:00
Room: ESTEC Restaurant
14:00 Power Passivation systems
Power Passivation systems
14:00 - 15:30
Room: Auditorium
Contributions

14:00 State of the art overview - François Bausier (ESA)

14:20 Battery safety assessment and testing - Bruno Samaniego Lopez (Airbus Defence and Space)

14:40 Solar Array Passivation based on the galvanic isolation - Vincent Lempereur (TAS)

15:00 Assessment of risk of debris generation due to battery failure in cubesats - Alessandro Chiesa (Aviospace)
Ecodesigning a space mission
Ecodesigning a space mission
14:00 - 15:30
Room: Multimedia Library
Contributions

14:00 EcoDesign: Towards Life Cycle Sustainability of Space Systems - Andrew Wilson (University of Strathclyde)

14:20 Space OPERA: integrating environmental performance into concurrent design - Augustin Chanoine

14:40 Lessons learned from the Sentinel 3 LCA and Applications to a GreenSat - Nicolas Thiry (Thales Alenia Space)

15:00 Ecodesign applied to ESA’s PROBA-Vegetation satellite - An vercalsteren (Vito NV)
Space Servicing Vehicle
Space Servicing Vehicle
14:00 - 15:30
Room: Erasmus building
Contributions

14:00 Space Transportation Bus: An opporunity for new possibilities of Space Exploitation or Space Tug - carole billot (thales alenia space france)

14:20 Space Tug - Gerrit Proffe (OHB System AG) Marc Scheper (OHB)

14:40 Space Utility vehichle - Eugenio Ferreira (Airbus)

15:00 Utilising the Space Drone spacecraft for ADR - Danna Linn Barnett (Effective Space Solution)
15:30 Coffee break
Coffee break
15:30 - 16:00
Room: Erasmus building
16:00 Propulsion Passivation Systems
Propulsion Passivation Systems
16:00 - 18:00
Room: Auditorium
Contributions

16:00 System impacts of propulsion passivation - Andreas Gernoth (ESA)

16:20 SMA Valve for fluidic passivation - Stephan Kraus (ariane group)

16:40 Life time extension of pyro actuations for passivation - Pierre Joanny (Dassault Aviation)

17:00 Passivation device for Spacecraft Propulsion System - DENIS DILHAN (CNES)

17:20 Sentinel-1 Space Debris Mitigation - Svein Lokas (ESA)
Atmospheric impact
Atmospheric impact
16:00 - 18:00
Room: Multimedia Library
Contributions

16:00 Impacts of space vehicles' launch and re-entry on the ozone layer and climate - Slimane Bekki (CNRS)

16:20 Atmospheric impact of spacecraft demise - Lilith Grassi (Thalès Alenia Space)

16:40 Experimental Modelling of Alumina Particulate in Solid Booster - Dominik Saile (DLR)

17:00 Impact on atmosphere and ocean - Sophia Klink (Université de Montpellier)

17:20 Questions & Answers
GNC
GNC
16:00 - 18:00
Room: Erasmus building
Contributions

16:00 ESA GNC Technologies and Test Beds for ADR and Space Tug Applications - Guillermo Ortega (ESA)

16:20 On-ground testing of vision-based navigation for non-cooperative rendezvous targets using cameras in the visible and thermal infrared range - Manuel Sanchez Gestido (ESA)

16:40 Investigation of Detumbling Techniques - Fernando Gandia (GMV)

17:00 COMRADE - Fernando Gandía Abellán (GMV)

17:20 HIPNOS: High Performance Avionics Solution for Advanced and Complex GNC Systems for ADR - David Gonzalez-Arjona (GMV Aerospace and Defence)
18:00 SPACE TUG ECONOMICS ROUND TABLE
SPACE TUG ECONOMICS ROUND TABLE
18:00 - 19:00
Room: Auditorium
Contributions

18:00 Space Tugs economics Round Table
19:00 Dinner
Dinner
19:00 - 21:00
Room: ESTEC Restaurant
Wednesday 25 October 2017

09:00 The legal aspects of space debris
The legal aspects of space debris
09:00 - 09:30
Room: High Bay
09:30 Design for Demise - characterization and simulation
Design for Demise - characterization and simulation
09:30 - 11:30
Room: Erasmus building
Contributions

09:30 Overview of CNES SRL activities related to the compliance of the satellites with French Space Act - Pierre Omaly (CNES)

09:50 Characterisation of the behaviour of typical spacecraft materials exposed to re-entry environment conditions - Benoit Bonvoisin (ESA)

10:10 Demisable materials database - James Merrifield (Fluid Gravity Engineering)

10:30 The Horizon 2020 ReDSHIFT Project: 3D printing of demisable spacecraft - Alessandro Rossi (IFAC-CNR)

10:50 Reentry tools: DRAMA upgrade and reentry tumbling state with IOTA - Ronny Kanzler (HTG)

11:10 Demise Observation Capsule: Progress update - Trevor Watts (Science & Technology B.V)
LCA SPACE PROPELLANTS ROUND TABLE
LCA SPACE PROPELLANTS ROUND TABLE
09:30 - 11:30
Room: Multimedia Library
Contributions

09:30 LCA space propellants Round Table
GNC
GNC
09:30 - 11:30
Room: Erasmus building
Contributions

09:30 Technology building blocks and ongoing activities regarding spectral sensing for relative navigation - Marco Esposito (cosine Research BV)

09:50 The RVS3000 and the RVS 3000-3D LIDAR Sensors: Recent Technological Advances and Future Applications - Florian Kolb (Jena Optronik)

10:10 ORCO: End-to-end On Ground System Validation of combined technologies for Debris Removal - Fernando Gandía Abellán (GMV)

10:30 VIMANCO: Vision Manipulation of non-cooperative objects - Vassilios Papantoniou (HTR)

10:50 Using Infrared-base relative navigation for Active Debris Removal - Özgün Yilmaz (University Cranfield, UK / ESA)

11:10 Navigation on a chip - Florian Kolb (Jena Optronik)
11:30 Coffee break
Coffee break
11:30 - 11:50
Room: Erasmus building
11:50 System level Design for Demise
System level Design for Demise
11:50 - 13:10
Room: Auditorium
Contributions

11:50 Multidisciplinary assessment of D4D techniques - Ronny Kanzler (HTG)

12:10 D4OP – Demisability for Optical Payloads - Simone Bianchi (TAS)

12:30 Demisability of Optical Payloads - James Beck (Belstead Research Ltd)

12:50 Identification of re-entry critical launch vehicle components - Stijn Lemmens (European Space Agency)
SINGLE SCORE ROUNDTABLE
SINGLE SCORE ROUNDTABLE
11:50 - 13:10
Room: Multimedia Library
Contributions

11:50 Single Score Round Table
Robotics
Robotics
11:50 - 13:10
Room: Erasmus building
Contributions

11:50 ESA Robotics for ADR and Space Tug Applications - Gianfranco Visentin (ESA)

12:10 Development of a gripper and the associated MGSE equipment - Jaroslaw Jaworski (PIAP Space)

12:30 PREDATOR : ENVISAT capturing strategy using a STEWART platform based gripper - Stelios Skevakis (HTR)

12:50 Using a plenoptic camera for vision based navigation in an Active Debris Removal scenario - Jonas Philipp Lüke (Universidad de La Laguna)
13:10 Lunch break
Lunch break
13:10 - 14:00
Room: ESTEC Restaurant
14:00 Platform equipment Design for Demise
Platform equipment Design for Demise
14:00 - 15:30
Room: Auditorium
Contributions

14:00 Design and breadboarding of technologies for early breakup of spacecraft - Gerrit Proffe (OHB System AG)

14:20 Demisable joint - Lilith Grassi (TAS)

14:40 Demisable joints CleanSat study - Stephan Kraus (ariane group)

15:00 Questions & Answers
REACH and Obsolescence Risks
REACH and Obsolescence Risks
14:00 - 15:30
Room: Multimedia Library
Contributions

14:00 Can citric acid be used as an environmentally friendly alternative to nitric acid passivation for steel? An experimental and Life Cycle Assessment (LCA) study - Christopher Zimdars (Quantis) Usoa Izagirre (TECNALIA)

14:20 Alternative pretreatments to aluminium - Ana G. Pereira (ISQ)

14:40 REACH replacement of pyrovalve initiator powder - Pierre Joanny (Dassault Aviation)

15:00 How to assess REACH-related obsolescence risk in early design? - Augustin Chanoine (Deloitte) Tim Becker (ReachLaw)

15:10 Natural fiber composites for space applications - Julien Rion (Bcomp SA)
Robotics
Robotics
14:00 - 15:30
Room: Erasmus building
Contributions

14:00 Pre-Development of a Clamping Mechanism - Iñigo Sard (AVS)

14:20 Design and Performance Analysis of the DLR robot manipulator arm for the e.Deorbit mission - Roberto Lampariello (DLR)

14:40 Validation Methodology of the Rendezvous and Grasping Maneuver on the Planar Air-Bearing Microgravity Simulator - Karol Seweryn (Space Research Centre PAS (CBK PAN))

15:00 ASSIST - Dario Mora
15:30 Coffee break
Coffee break
15:30 - 16:00
Room: Erasmus building
16:00 Platform equipment Design for Demise
Platform equipment Design for Demise
16:00 - 18:00
Room: Auditorium
Contributions

16:00 Containment tether - Gerrit Proffe (OHB System AG)

16:20 Demisability Assessment of Reaction Wheels - Geert Smet (ESA)

16:40 Demisable materials compatibility for Tanks - Adam Watts (Nammo Westcott Ltd)

17:00 Demisable propellant tank design - Renato Bellarosa (Airbus) Sylvain Goek (Ariane Group)

17:20 Questions & Answers
Space Sustainability
Space Sustainability
16:00 - 18:00
Room: Multimedia Library
Contributions

16:00 Space Sustainability in the 21st Century - Jorge Del Rio Vera (UNOOSA)

16:20 Spacecraft design indicator fo space debris - Camilla Colombo (Politecnico di Milano)

16:40 Towards the consideration of space debris within the Life Cycle Assessment Framework - Thibaut Maury (Ariane Group / Univ. Bordeaux)

17:00 Simulating the Beginning of the Congestion-Tipping Period for Earth Orbits - Michel van Pelt (ESA)

17:20 Economic value of space debris - Romain Esteve (Toulouse School of Economics (TSE))
Flexible
Flexible
16:00 - 18:00
Room: High Bay
Contributions

16:00 Tethered-tugs dynamics and control verification and models validation by 0g experiments on parabolic flights - Michelle Lavagna (Politecnico di Milano)

16:20 Design and Dynamic Testing of Tether System as Active Capture Technology for e.Deorbit and Net/Harpoon Based Missions - Lorenzo Marconi (Arescosmo S.p.A.)

16:40 ISS SPHERES Tether Dynamics Experiments / Evaluation of Tethered Active Debris Removal Issues - Marcel Becker (German)

17:00 Full Scale Demonstration of Debris Capturing with Deployable Nets - Wojtciech Golebiowski (SKA Polska)

17:20 PATENDER: A Net-Based Experiment and Possible Solution to the Space Debris Problem - Lorenzo Cercos (GMV)
18:00 Sustainability of Space round table
Sustainability of Space round table
18:00 - 19:00
Room: Auditorium
Contributions

18:00 Sustainability of Space Round Table
19:00 Football tournament
Football tournament
19:00 - 20:30
Room: Escape
Thursday 26 October 2017

09:00

09:00 - 11:00
Room: Multimedia Library
Semi-controlled re-entry round table
Semi-controlled re-entry round table
09:00 - 11:00
Room: Auditorium
Contributions

09:00 Semi-controlled re-entry Round Table
ESA Robotics / Lab Tours
ESA Robotics / Lab Tours
09:00 - 11:00
Room: High Bay

11:00 Coffee break
Coffee break
11:00 - 11:30
Room: Erasmus building

11:30 ATD3
ATD3
11:30 - 13:00
Room: Multimedia Library
Deorbit equipment
Deorbit equipment
11:30 - 13:00
Room: Auditorium
Contributions

11:30 Environmental impact of passive deorbit devices - Camilla Colombo (Politecnico di Milano)

11:50 ADEO Passive De-Orbit Subsystem Activity leading to a Dragsail Demonstrator: Conclusion and Next Steps - Thomas Sinn (HPS GmbH)

12:10 Electrostatic tether plasma brake module for deorbiting - Pekka Janhunen (Finnish Meteorological Institute)

12:30 Customer-driven deorbit kit based on bare electrodynamic tether technology - Eduardo Urgoiti (SENER)
e.Inspector
e.Inspector
11:30 - 13:00
Room: High Bay
Contributions

11:30 e.Inspector - a cubesat inspection mission - Sara Morales Serrano (ESA)

11:40 Inspection trajectories and GNC design - Eric Reinthal (University of Würzburg) Jesus Gil (ESA/ESTEC)

12:00 High thrust chemical propulsion for small satellites - Tobias Knop (Hyperion Technologies)

12:20 Efficient De-Orbiting of Micro and Nano Satellites Using the IFM Nano-Thruster - Alexander Reissner (FOTEC)

12:40 Nanosat propulsion systems - Zeger de Groot (ISIS)
13:00 Lunch break
Lunch break
13:00 - 14:00
Room: ESTEC Restaurant

14:00 ATD3
ATD3
14:00 - 15:00
Room: Multimedia Library
Deorbit equipment
Deorbit equipment
14:00 - 15:00
Room: Auditorium
Contributions

14:00 Overview of technologies for controlled deorbit - Tiago Soares (ESA)

14:20 Electronic pressurant regulator - Adam Watts (Nammo Westcott Ltd)

14:40 Arcjet - Stefan Gregucci (Sitael)
Greensat brainstorming
Greensat brainstorming
14:00 - 15:00
Room: CDF
Mega Constellations
Mega Constellations
14:00 - 15:00
Room: High Bay
Contributions

14:00 Mega Constellations EOL operations - Kate Symonds (ESA)

14:20 Active Debris Removal: A possible solution for megaconstellations - carole billot (thales alenia space france)

14:40 Design for Removal: A cost efficient opportunity to prepare future satellites to an an ADR mission - carole billot (thales alenia space france)
15:00 Coffee break
Coffee break
15:00 - 15:30
Room: Erasmus building

15:30 ATD3
ATD3
15:30 - 16:30
Room: Multimedia Library
Autonomous Deorbit systems
Autonomous Deorbit systems
15:30 - 16:30
Room: Auditorium
Contributions

15:30 Deorbit Motors for Active Deorbiting - Ulrich Gotzig (Ariane Group)

15:50 Conceptual design of Solid Rocket Motor for deorbitation and advances in the development of an Aluminium-free solid propellant - Adam Okniński (Institute of Aviation)

16:10 D-SAT Mission: an In-Orbit Demonstration of Satellite Controlled Re-entry - Alessio Fanfani (D-Orbit)
Greensat brainstorming
Greensat brainstorming
15:30 - 18:00
Room: CDF
Reliability round table
Reliability round table
15:30 - 16:30
Room: High Bay
Contributions

15:30 Reliability Round Table
16:30 Wrap up
Wrap up
16:30 - 17:30
Room: High Bay