Name: European Space Thermal Engineering Workshop 2024
Start: 2024-10-08T08:00:00+02:00
End: 2024-10-10T18:00:00+02:00
Location: ESA/ESTEC

European Space Thermal Engineering Workshop 2024

from Tuesday, October 8, 2024 (8:00 AM) to Thursday, October 10, 2024 (6:00 PM)

Monday, October 7, 2024
Tuesday, October 8, 2024

8:00 AM

8:00 AM - 9:30 AM
9:30 AM
9:30 AM - 11:00 AM
Room: Newton
Contributions

9:30 AM Opening - Harrie Rooijackers (ATG-Europe)

9:45 AM General introduction - Olivier Pin

10:00 AM ESA Missions and Thermal Technology Development Update - Stephane Lapensee (ESA)
11:00 AM Coffee Break
Coffee Break
11:00 AM - 11:30 AM
11:30 AM
11:30 AM - 1:00 PM
Room: Einstein
Contributions

11:30 AM Thermal design, test and performance characterization of a smallsat for an Earth Observation constellation - Francesco Latella (ARGOTEC S.R.L.)

12:00 PM FENNEC: A Deployable Radiator for The Next Generation of High-Power SmallSats - Benedikt Bauer (Dcubed GmbH) Chirag Singh Mukherjee (German Orbital Systems GmbH)

12:30 PM Thermal Analysis of the CHESS Pathfinder 1 CubeSat Mission - Lina Kuhlmann (EPFL Spacecraft Team) Valentin Moret (EPFL Spacecraft Team)
11:30 AM - 1:00 PM
Room: Newton
Contributions

11:30 AM ANTENNA THERMAL ANALYSIS OF AEROBRAKING PHASE – A TASI APPROACH - DIANA SCIULLI (THALES ALENIA SPACE ITALIA)

12:00 PM THERMAL MODELLING OF LARGE DEPLOYABLE REFLECTOR MESH SURFACE - GIOVANNI DI LELLA (Thales Alenia Space Italia)

12:30 PM Thermal modelling of an optical instrument using ANSYS FEA - Marian Partzsch (Forschungszentrum Jülich GmbH)
1:00 PM Lunch
Lunch
1:00 PM - 2:00 PM
2:00 PM
2:00 PM - 4:00 PM
Room: Einstein
Contributions

2:00 PM Recent advances in EHD-based pumped loops and thermal switches - Robert Thorslund (APR Technologies)

2:30 PM Fluid selection in a two-phase mechanically pumped loop testbench for aerospace applications - Mauricio Pedroza-Torres (Research engineer / ULiège)

3:00 PM On-ground testability of complex thermal bus for accurate temperature regulation with Constant Conductance Heat Pipes (CCHP) and Variable Conductance Heat Pipe (VCHP) - Mikael Mohaupt (Lead Design Engineer at EHP) Yann Cervantes (Thermal Expert at CNES)

3:30 PM Development of Multievaporator Heat Loops - Luka Ivanovskis (Allatherm SIA)
2:00 PM - 4:00 PM
Room: Newton
Contributions

2:00 PM Thermal Control System: a design data model to facilitate digital continuity - Alexandre Darrau (ESA) Elaheh Maleki (ESA)

2:30 PM Digitalization of Thermal Engineering Processes - Hans Peter de Koning (DEKonsult)

3:00 PM Development of a CPU- and GPU-based Ray Tracer for Space Applications - David Thermann (FH Aachen University of Applied Sciences)

3:30 PM Creation of two thermal models of the 4N / 10kNs-class propulsion system using step-TAS and ESA’s TD TAS converter - Alexander Walker (Lunar Outpost US) Tobias Flecht (LunarOutpost EU)
4:00 PM Coffee Break
Coffee Break
4:00 PM - 4:30 PM
4:30 PM
4:30 PM - 6:00 PM
Room: Newton
Contributions

4:30 PM Phase Change Material Heat Capacitor: performance reached for an hypersonic glider and industrialisation - JP Collette (Walopt)

5:00 PM Phase Change Material in Space Electronic Systems for ADHA and Space VPX standards: simulations and TVAC testing - Artur Jurkowski Radosław Paluch

5:30 PM Development of efficient concepts for mounting of thermal MLI blankets - Klaus Reitterer (Beyond Gravity Austria GmbH)
4:30 PM - 6:00 PM
Room: Einstein
Contributions

4:30 PM THERMAL TESTING & CORRELATION IN THE FREQUENCY DOMAIN - Alexander van Oostrum (ATG Engineering)

5:00 PM Debugging a STM test for the SXI instrument on SMILE - Matthew Vaughan (ESA)

5:30 PM LISA Phasemeter: Thermal Design and Phase Readout Performance - Alicia López Jaén (AEI-Hannover) José Ogalde (AEI Hannover) Pablo Martínez Cano (AEI) Sergio Lozano Althammer (AEI-Hannover)
6:00 PM Cocktail
Cocktail
6:00 PM - 7:30 PM
Wednesday, October 9, 2024
9:00 AM
9:00 AM - 11:00 AM
Room: Einstein
Contributions

9:00 AM Rationalization of Thermal Simulators for Operations - Alexandre Darrau (ESA) Maxime ANDRE Thierry Basset (Thales Alenia Space) François Brunetti

9:30 AM Methodology and simulation of thermal noise in the frame of LISA IDS instrument performance test - Maxime ANDRE

10:00 AM Leveraging Standardized Satellite Architecture For Thermal Analysis - Adrien Feve (Loft Orbital Technologies) Imane Karmoudi (Loft Orbital Technologies)

10:30 AM Trade-off of Optimization Algorithms for Space Thermal Engineering - Baptiste Pierron (University of Nice)
9:00 AM - 11:00 AM
Room: Newton
Contributions

9:00 AM Evolution of thermo-optical properties of solar panels or thermal control materials with lunar dust simulants contamination - Philipp Hager (ESA)

9:30 AM Adjustable Support Structure for Optical Sensors, ASSOSS - Thermal System - Carlos Saunders (Brandenburgische Technische Universität Cottbus – Senftenberg) Shehna Sagaria (Space Structures GmbH)

10:00 AM Development of a Deployable Radiator Equipped with Loop Heat Pipes for high throughput communication satellites. - Takeshi Miyakita (JAXA)

10:30 AM Multicase topology optimization for the thermal design of space systems - Carlos Arroyo Ruiz (Universidad Politécnica de Madrid)
11:00 AM Coffee Break
Coffee Break
11:00 AM - 11:30 AM
11:30 AM
11:30 AM - 1:00 PM
Room: Einstein
Contributions

11:30 AM Guidelines for the use of Aluminum Grooved Heat Pipes (AGHP) with non negligible gravity effects - Mikael Mohaupt (Lead Design Engineer at EHP)

12:00 PM A review of variable conductance heat pipes for planetary surface vehicles and deep space missions - Ashraf Al-Bahlawan

12:30 PM MICROGRAVITY FLOW BOILING HEAT TRANSFER ENHANCEMENT VIA FEMTOSECOND LASER TEXTURED MICROFEATURES - Frederik Mertens (KU Leuven)
11:30 AM - 1:00 PM
Room: Newton
Contributions

11:30 AM Development of a Compact Lightweight Micro-Channel Heat Exchanger (MCHX) for Reusable Launch Systems - Kandarp Amin

12:00 PM Thermal design and analysis of FLEX spacecraft - Adeeb Nazeeruddin

12:30 PM Advanced Thermal Control for Space Payloads: A Multi-Processor Approach - Jintin Frank
1:00 PM Lunch
Lunch
1:00 PM - 2:00 PM
2:00 PM
2:00 PM - 4:00 PM
Room: Newton
Contributions

2:00 PM Predictive Modeling of Thermal Interfaces for Space Applications - Erik Anderson (Carbice)

2:30 PM Development and Implementation of a Python GUI for Efficient Management of ESATAN-TMS Thermal Models - Javier Piqueras Carreño

3:00 PM Linearization of the Radiative Component of the Heat Transfer Equation for Space Thermal Analysis - Charles Fabre (University of Nice)

3:30 PM Comprehensive Thermal Management Analysis for NUSES and WINK Space Missions Using COMSOL Multiphysics - Uygar Atalay
2:00 PM - 4:00 PM
Room: Einstein
Contributions

2:00 PM Design of an Actively Shuttered Dust-Resilient Radiator for Lunar Applications - Angel Iglesias (Almatech SA)

2:30 PM Thermal challenges in the deployment of an Environmental Network on the Mars Surface through miniature probes. - Alejandro Gonzalo (INTA)

3:00 PM Design Improvements on the Active Thermal Switch - Tobias Flecht (LunarOutpost EU)
4:00 PM Coffee Break
Coffee Break
4:00 PM - 4:30 PM
4:30 PM
4:30 PM - 6:00 PM
Room: Newton
Contributions

4:30 PM Update on thermal analysis and data exchange activities in ESA - James Etchells

5:00 PM Optimization of detailed Cubsat thermal model coupled with system power budget analysis - Jean-Frederic Ruel (Maya HTT)

5:30 PM Efficient Integration of Space Thermal Analysis Model - Antoine Caugant James Etchells
4:30 PM - 6:00 PM
Room: Einstein
Contributions

5:00 PM IMPROVEMENT OF ANTENNA THERMAL RADIATORS EFFICIENCY USING AN INNOVATIVE TAPE AS OPTICAL SOLAR REFLECTOR - DIANA SCIULLI (THALES ALENIA SPACE ITALIA)

5:30 PM The development of First-Flex, a new flexible Optical Solar Reflector - Sandro Mengali (Consorzio CREO)
6:00 PM Workshop Dinner
Workshop Dinner
6:00 PM - 9:00 PM
Thursday, October 10, 2024
9:30 AM
9:30 AM - 11:00 AM
Room: Newton
Contributions

10:00 AM Oscillating Heat Pipe for Commercial Space Applications: Reliability and Flight Heritage - Corey Wilson (ThermAvant Technologies)

10:30 AM Testing of the chemical compatibility of two-phase devices composed by Aluminum and Stainless-Steel materials with Ammonia as working fluid operating at high temperatures - Mikael Mohaupt (Lead Design Engineer at EHP)
9:30 AM - 11:00 AM
Room: Einstein
Contributions

9:30 AM Pycanha: An Open-Source Tool for Thermal Analysis - Javier Piqueras Carreño

10:00 AM Accelerating Aerospace Development through Ansys Thermal Desktop - Monica Ramirez Lastra (Ansys)

10:30 AM ESATAN Thermal Modelling Suite - Product Developments - Henri Brouquet
11:00 AM Coffee Break
Coffee Break
11:00 AM - 11:30 AM
11:30 AM
11:30 AM - 1:00 PM
Room: Einstein
Contributions

11:30 AM Benchmarking Radian: a cloud-based thermal analysis software - David Criado

12:00 PM Thermal Correlation of Reduced Models Using an Adjoint-Based Solver - Jean-Frederic Ruel (Maya HTT)
11:30 AM - 1:00 PM
Room: Newton
Contributions

11:30 AM High Temperature Power Supply For Solid State Power Amplifiers - Jérôme Garnier (Thales Alenia Space Belgium)

12:00 PM JUICE PEP NU thermal analysis with flight telemetry - Sebastian Wolf

12:30 PM A STOP Analysis workflow. Application to a lunar satellite - Daniel Navajas Ortega (Ansys)
1:00 PM Closure
Closure
1:00 PM - 1:15 PM
Room: Newton
Contributions

1:00 PM Closure - Harrie Rooijackers (ATG-Europe)

Choose timezone