Name: 2022 Clean Space Industry Days
Start: 2022-10-10T13:30:00+02:00
End: 2022-10-13T18:15:00+02:00
Location: ESTEC

2022 Clean Space Industry Days

from Monday, 10 October 2022 (13:30) to Thursday, 13 October 2022 (18:15)

Monday, 10 October 2022

13:30 Coffe break
Coffe break
13:30 - 14:00
14:00 Opening of the clean space industry day
Opening of the clean space industry day
14:00 - 17:00
Room: High Bay in the Erasmus building
Contributions

14:00 Welcome and Opening by Rolf Densing, ESA director of Operations

14:10 Clean Space from the Technology Directorate perspective, by Riccardo de Gaudenzi, head of ESA's electrical Department

14:20 Sustainable Space: an Earth Observation Programme perspective, by Toni Tolker-Nielsen, head of the Earth Observation Projects Department

14:30 Roundtable: What is a sustainable space?

15:00 Clean Space: a short overview by Luisa Innocenti, head of the ESA Clean Space initiative

15:15 Roundtable: how to enable the In-Orbit Servicing market?

16:00 The Space Safety Programm by Holger Krag, head of the Space Safety programme

16:15 Wrap-up by Luisa Innocenti
Tuesday, 11 October 2022

08:30 Coffee Break
Coffee Break
08:30 - 09:00

09:00 What is the ESA Zero Debris Approach?
What is the ESA Zero Debris Approach?
09:00 - 09:30
09:30 Setting the scene of eco design for space
Setting the scene of eco design for space
09:30 - 11:00
Room: Earth room in the Erasmus building
Contributions

09:30 LCA and Ecodesign at ESA - Estefania Padilla Gutierrez (ESA (ESOC)) Sara Morales Serrano (ESA)

10:00 EC Environmental policy - Vera Pinto (European Commission)

10:30 ESA CSR and strategy for overcoming CLIMATE and SUSTAINABILITY challenges - Elisabetta Lamboglia (ESA)
Zero Debris platform
Zero Debris platform
09:30 - 11:00
Room: High Bay in the Erasmus building

11:00 Coffee Break
Coffee Break
11:00 - 11:30
11:30 Setting the scene of eco design for space
Setting the scene of eco design for space
11:30 - 13:00
Room: Earth room in the Erasmus building
Contributions

11:30 Regulatory-driven materials' obsolescence risks and their impact on European Space Sector - Premysl Janik (ESA)

12:00 Criticality assessment of the EU space systems’ supply chains: initial findings and identification of further data needs - Thibaut MAURY-MICOLIER (European Commission - JRC)

12:30 Space missions: Benchmarking of environmental impacts - Natacha Wonneberger Augustin Chanoine
Zero Debris removal services
Zero Debris removal services
11:30 - 13:00
Room: High Bay in the Erasmus building
Contributions

11:30 Introduction by ESA

11:35 clearspace and debris removal - Rory Holmes (ClearSpace UK)

11:50 Astroscale’s Pioneering ADR & IOS Mission Developments: A Status Update - Jason Forshaw (Astroscale)

12:05 The Return Capture Payload Bay (CAT), designing and testing the ADR payload for the next future - Fernando Gandia (Abellan)

12:20 IOSHEX and Space Rider interaction as a new range of in-orbit complementary services in LEO - Inna Uwarowa (SAB Aerospace s.r.o.)

12:35 The UK Space Agency’s Active Debris Removal Mission - Jodie Howlett (UK Space Agency)
13:30 Coffee Break
Coffee Break
13:30 - 14:00
14:00 LCA framework
LCA framework
14:00 - 15:30
Room: Earth room in the Erasmus building
Contributions

14:00 ESA LCA DB End-User Experience - Ionut Grozea (SC DEIMOS SPACE SRL)

15:00 Environmental Expert Evaluation of ESA Space System LCA Guidelines - Natacha Wonneberger Augustin Chanoine
Deorbit & Passivation
Deorbit & Passivation
14:00 - 15:30
Room: High Bay in the Erasmus building
Contributions

14:00 Deorbit sail effectiveness analysis from the perspective of orbital parameter measurements - Inna Uwarowa (SAB Aerospace s.r.o.)

14:30 Deorbiting Solid Rocket Motor equipped with Thrust Vector Control – a base for propulsion system for controlled re-entry - Pawel Nowakowski (Lukasiewicz Research Network - Institute of Aviation) Ewa Majewska (Lukasiewicz Research Network – Institute of Aviation)

15:00 D-Orbit’s Deorbiting Kit: a solution for the End-of-Life Management of launcher and spacecraft - Portia Bowman (D-Orbit)
IOS missions
IOS missions
14:00 - 15:30
Room: Auditorium in the Erasmus building
Contributions

14:00 ESA's commercial IOS mission

14:10 Leading the development of refuelling in LEO - Marie Tilbee (Astroscale)

14:30 Europe’s New Commercial Orbital Revenue Extension Mission - Gayatri Patel (ClearSpace Today) Pierre Crucis (ClearSpace SA)

14:50 D-Orbit In-Orbit Services missions: leveraging infrastructures to create value - Portia Bowman (D-Orbit)

15:10 Start-€, the first Space Alliance in-orbit servicing demonstration with a direct commercial application - Loïc DUBOIS (Telespazio France) Stéphanie BEHAR-LAFENETRE (Thales Alenia Space) Brendan LOYANT (Telespazio France) Stefania Mazzeo (Telespazio)
15:30 Coffee Break
Coffee Break
15:30 - 16:00
16:00 Experience gained in LCA
Experience gained in LCA
16:00 - 17:30
Room: Earth room in the Erasmus building
Contributions

16:00 A life cycle assessment of alternative materials for a cubesat manufacturing - Andrea Mio (University of Trieste)

16:30 Eurostar Neo Battery Pack Life Cycle Assessment - Catarina Val

17:00 Metasat UK: A Start-Up in Space LCA - Haroon Oqab (Metasat UK)
Deorbit & Passivation
Deorbit & Passivation
16:00 - 17:30
Room: High Bay in the Erasmus building
Contributions

16:00 Passive deorbit technologies – enabling a clean space through autonomous deorbitting capability - Daniel Stelzl

16:30 Battery containment: design objectives and roadmap for small satellites - Geraldine Palissat

17:00 SMA Valve for Propulsion Subsystem Passivation - Armin Herbertz
WS on IOS missions
WS on IOS missions
16:00 - 17:30
Room: Auditorium in the Erasmus building

19:00 Clean Space Dinner
Clean Space Dinner
19:00 - 22:00
Wednesday, 12 October 2022

08:30 Coffee Break
Coffee Break
08:30 - 09:00

09:00 Legal Aspects of Space Debris Mitigation – ESA Perspective
Legal Aspects of Space Debris Mitigation – ESA Perspective
09:00 - 09:30

09:30 Green 4 ESA
Green 4 ESA
09:30 - 11:00
Room: Earth room in the Erasmus building
End of Life for smallsats
End of Life for smallsats
09:30 - 11:00
Room: High Bay in the Erasmus building
Contributions

09:30 Introduction by ESA: Smallsats in the context of space debris

09:50 End-of-Life Considerations for CubeSats - Lisa De Backer (GomSpace)

10:10 Roundtable on EOL for Cubesats and Microsats
11:00 Coffee Break
Coffee Break
11:00 - 11:30
11:30 LCA applied to Space
LCA applied to Space
11:30 - 13:00
Room: Earth room in the Erasmus building
Contributions

11:30 Environmental sustainability of future proposed space activities - Loïs Miraux (Space Generation Advisory Council)

12:00 Application of LCA in projects by Airbus DS - Julien Weber (Airbus DS)

12:30 Lessons learned by applying LCA to the CO2M space mission during phase B2 and C/D - An Vercalsteren (VITO)
End of Life for smallsats
End of Life for smallsats
11:30 - 12:30
Room: High Bay in the Erasmus building
Contributions

11:30 Concept of an Active Debris Removal 2-step capturing system for small satellites in Low Earth Orbit - Maxime Hubert Delisle (SpaceR Research Group - University of Luxembourg)

12:00 Tyvak International solutions - Margherita Cardi
13:30 Coffee Break
Coffee Break
13:30 - 14:00
14:00 LCA Applied to Space: Launch vehicles
LCA Applied to Space: Launch vehicles
14:00 - 15:40
Room: Earth room in the Erasmus building
Contributions

14:00 Introduction to Post-NESTS Ultra-Green Launch & Space Transportation Systems - Luis Escudero

14:10 Study in the field of Ultra-Green Launch & Space Transportation Systems - Delphine Guillemin Céline Brun-Buisson

14:35 Ultra-green Launch & Space Transportation Systems Study - Oliver Turnbull (Orbex) Penny Godfrey (Orbex)

15:00 Green Space Logistics Project – A Software Tool for Rapid Assessment and Comparison of Space Transportation Vehicles' Environmental Impacts for Design Trade-Offs - Mathieu Udriot (EPFL Space Center)
Design 4 Demise
Design 4 Demise
14:00 - 15:30
Room: High Bay in the Erasmus building
Contributions

14:00 ESA Design for Demise Overview - Antonio Caiazzo (ESA)

14:10 Does the Presence of Multi-Layer Insulation Increase Ground Risk from Re-entry? - James Beck (Belstead Research Ltd)

14:30 Design for containment techniques to reduce spacecraft re-entry footprint - Roxane Josses (Thales Alenia Space)

14:50 Demisability analysis of materials properties for critical optical components in space applications - Emanuele Alberto Slejko (University of Trieste)

15:10 Component Containment Techniques for Spacecraft Re-entry Events - Bradley Lockett (OHB)
Close Proximity Operations
Close Proximity Operations
14:00 - 15:30
Room: Auditorium in the Erasmus building

15:30 Coffee Break
Coffee Break
15:30 - 16:00
16:00 LCA Applied to Space: Launch vehicles
LCA Applied to Space: Launch vehicles
16:00 - 17:30
Room: Earth room in the Erasmus building
Contributions

16:00 Ecodesign of a launch service based on a semi-reusable minilauncher - Loïs Miraux (MaiaSpace)

16:30 A Comprehensive Approach to Life Cycle Assessment of Space Transport Systems - Jan-Steffen Fischer (University of Stuttgart, Institute of Space Systems)

17:00 Propelant's impact - Enrico Tormena (Clean Space) Guillermo Dominguez Calabuig (Space Launcher System Analysis (SART), German Aerospace Center (DLR)) Loïs Miraux (MaiaSpace) Sara Morales Serrano (ESA)
Design For Removal
Design For Removal
16:00 - 18:00
Room: High Bay in the Erasmus building
Contributions

16:00 Standard Interfaces for Design for Removal - Estefania Padilla Gutierrez (ESA (ESOC))

16:20 Passive Navigation Aids Development for EOL Management - Béla Márton Somosvári

16:40 Satellite License Plate: a cooperative laser-enabled satellite identification method - Fabrizio Silvestri (TNO Optics)

17:00 Mechanical Interface for Capture at End-of-Life (MICE) qualification - Carmen Camañes (AVS Added Value Solutions)

17:20 Reflector-based Attitude Detection System - SLR Residual Simulation Tool - Sebastian Schneider (Space Research Institute, Austrian Academy of Sciences)
18:00 Friendly clean space football tournament
Friendly clean space football tournament
18:00 - 20:00
Thursday, 13 October 2022

08:30 Coffee Break
Coffee Break
08:30 - 09:00

09:00 Why do we talk about orbital capacity?
Why do we talk about orbital capacity?
09:00 - 09:30
09:30 Circular economy in space
Circular economy in space
09:30 - 11:00
Room: Auditorium in the Erasmus building
Contributions

09:30 ESA circular economy - Antonio Caiazzo (ESA)

09:40 D-orbit vision of the space environment in 2050 - Portia Bowman (D-Orbit)

10:00 Outcomes of the PERIOD project on In-Space Manufacturing, Assembly and Refuelling Technologies - Stéphane Estable (Airbus)

10:20 OHB Vision to preserve space values through In-Orbit Servicing in the timeframe of 2030-2050 - Christiane Bergemann (OHB)

10:40 Refuelling Design and Development activities at Thales Alenia Space in the UK - Sebastian Hill
10:00 Greener Alternatives
Greener Alternatives
10:00 - 11:00
Room: Earth room in the Erasmus building
Contributions

10:00 Life Cycle Assessment of eco-design options for printed circuit boards and electronic assembly - Maarten Cauwe (imec-Cmst)

10:30 Optimizing germanium substrate usage in the manufacturing of MJ solar cells: from concepts to demonstrators - Guillaume Courtois (Umicore EOM)
11:00 Coffee Break
Coffee Break
11:00 - 11:30

11:30 Wrap-up
Wrap-up
11:30 - 12:30
Room: Earth room in the Erasmus building
Lessons learnt from missions
Lessons learnt from missions
11:30 - 13:00
Room: High Bay in the Erasmus building
Contributions

11:30 ESA Harmony - erik de Witte (ESA)

11:50 Management of End of Life for Airbus LEO satellites: the example of MetOp A - Sylvain Garces (Airbus Defence and Space)

12:10 CIMR end of life controlled re-entry strategy - Giuseppe ORONZO (Thales Alenia Space)

12:30 ESA NGGM - Luca Massotti (RHEA BV for ESA)
Circular economy in space
Circular economy in space
11:30 - 13:00
Room: Auditorium in the Erasmus building
Contributions

11:30 Creating Environmental and Economic Sustainability In Space Through Commercial Satellite Refueling - Connor Geiman (Orbit Fab)

11:50 Design of 3D printing setup for in-space application - Janis Willger (Technische Universität Braunschweig)

12:10 Recycling of hardware for Moon and Martian settlement - Christiane Bergemann

12:50 ESA introduction to manufacturing and assembling in space - Advenit Makayaf (ESTEC, European Space Agency)
13:30 Coffee Break
Coffee Break
13:30 - 14:00
14:00 Design 4 Demise
Design 4 Demise
14:00 - 15:30
Room: High Bay in the Erasmus building
Contributions

14:00 Demisable chemical propellant tank developments for satellites - Greame Yorwarth (Airbus Defence and Space)

14:15 Development of Demisable Fiber Reinforced Plastic Composites - Thorn Schleutker (German Aerospace Center DLR)

14:30 Experimental demise study of novel materials combinations for spacecraft structural panel assemblies - Alexandre Looten (EPFL)

14:45 SADM Design for Demise, Clean Space - Saastad Ilka

15:00 SpaceCraft Object Risk Evaluation Database - James Beck (Belstead Research Ltd)

15:15 Questions & Answers
Capture Technologies for IOS
Capture Technologies for IOS
14:00 - 15:30
Room: Auditorium in the Erasmus building
Contributions

14:00 ESA introduction to capturing technologies for IOS

14:10 Modular Robotic System for Future Servicing and Deorbiting Missions - Dominik Kleszczyński (PIAP Space)

14:25 Robotic Technologies for On Orbit Servicing - Maximo A. Roa (German Aerospace Center - DLR)

14:40 Development of a novel capture system - Emmanuel Onillon (12.07.1969)

14:55 Charging and ESD risks during in-orbit rendezvous manoeuvres - Jens Laube (OHB System AG) Henning Wulf (OHB System)
15:30 Coffee Break
Coffee Break
15:30 - 16:00
16:00 Design 4 Demise
Design 4 Demise
16:00 - 17:45
Room: High Bay in the Erasmus building
Contributions

16:00 Assisted Spacecraft Demise with Exothermic reactions - Patrik Kärräng (Hyperschall Technologie Göttingen (HTG))

16:15 D4D Technos from eNOVA consortium - HEINRICH Stephane HEINRICH Stephane (eNOVA Aerospace)

16:30 Improved Material Modelling for Destructive Re-entry Assessment - James Beck (Belstead Research Ltd)

16:45 Addressing DRACO mission phase A design challenges - Paolo Minacapilli (Elecnor Deimos)

17:00 Development of a 140 Am2 Magnetorquer designed for Improved Demisability - José Pimentão (Lusospace)

17:15 Questions & Answers
Rendezvous technologies for IOS
Rendezvous technologies for IOS
16:00 - 17:30
Room: Auditorium in the Erasmus building
Contributions

16:00 ESA introduction to Rendezvous technologies for IOS - Paul Duteis (ESA)

16:10 Space target capture with optical navigation and chaser-robotic arm combined control - Francesco Branz (Università degli Studi di Padova)

16:25 GNC & Vision-based navigation technologies for Rendezvous and On-Orbit Servicing - Pierre Dandré

16:40 Guidance, Navigation, and Control for the autonomous rendezvous with an uncooperative tumbling target - Alvaro Martinez (SENER Aeroespacial)

16:55 Validating a CNN-based Pose Estimation System for Relative Navigation with an Uncooperative Spacecraft on Myriad X Space Grade Processor - Tom Hendrix

17:10 Nvidia Omniverse for Active Space Debris Removal Missions, an Overview - Xiao LI (University of Luxembourg)
17:45 Wrap-up by Luisa Innocenti
Wrap-up by Luisa Innocenti
17:45 - 18:00