Name: Workshop on Gear Technology and Mechanisms Final Presentation Days 2016
Start: 2016-06-15T09:30:00+02:00
End: 2016-06-17T16:00:00+02:00
Location: ESTEC

Workshop on Gear Technology and Mechanisms Final Presentation Days 2016

from Wednesday, 15 June 2016 (09:30) to Friday, 17 June 2016 (16:00)

Monday, 13 June 2016
Tuesday, 14 June 2016
Wednesday, 15 June 2016

09:30 Welcome and introduction By TEC-MSM
Welcome and introduction By TEC-MSM
09:30 - 09:40
Room: Newton

09:40 ESTL Experiences with developing and testing of gears for space
ESTL Experiences with developing and testing of gears for space
09:40 - 10:05
Room: Newton

10:05 CETIM insitute presentation
CETIM insitute presentation
10:05 - 10:30
Room: Newton

10:30 KissSoft gear design software presentation
KissSoft gear design software presentation
10:30 - 10:55
Room: Newton

10:55 Break
Break
10:55 - 11:25
Room: Newton

11:25 New ceramic dynamometer dedicated to measurement of exported microvibrations (Kistler)
New ceramic dynamometer dedicated to measurement of exported microvibrations (Kistler)
11:25 - 11:45
Room: Newton

11:45 Influence of pre-treatments on performance of solid lubricants -with focus on low temperature application:Mars (AAC Austria)
Influence of pre-treatments on performance of solid lubricants -with focus on low temperature application:Mars (AAC Austria)
11:45 - 12:05
Room: Newton

12:05 Critical Factors Relating to Gearbox Performance - How to Specify a Gearbox for Application Success (Reliance Precision Limited)
Critical Factors Relating to Gearbox Performance - How to Specify a Gearbox for Application Success (Reliance Precision Limited)
12:05 - 12:35
Room: Newton

12:35 Dry lubricated gearbox development (Lidax)
Dry lubricated gearbox development (Lidax)
12:35 - 13:00
Room: Newton

13:00 Lunch
Lunch
13:00 - 14:00
Room: Newton

14:00 Harmonic drive gears for space -past experience, typical customer inquires, main requirements (Harmonic Drive A.G.)
Harmonic drive gears for space -past experience, typical customer inquires, main requirements (Harmonic Drive A.G.)
14:00 - 14:30
Room: Newton

14:30 Lessons Learnt from latest Projects using Spur Gears, Expectations from gear/gearbox subcontractors, ESA R&D (Airbus DS)
Lessons Learnt from latest Projects using Spur Gears, Expectations from gear/gearbox subcontractors, ESA R&D (Airbus DS)
14:30 - 14:55
Room: Newton

14:55 Break
Break
14:55 - 15:25
Room: Newton

15:25 Sources of noise and vibrations in gears (Siemens NV Belgium)
Sources of noise and vibrations in gears (Siemens NV Belgium)
15:25 - 15:45
Room: Newton

15:45 Gear transmission error measurement accuracy using low-cost digital encoders (Siemens NV Belgium)
Gear transmission error measurement accuracy using low-cost digital encoders (Siemens NV Belgium)
15:45 - 16:10
Room: Newton

16:10 Current use and main requirements on geared actuators in ESA projects -Science and Earth observation missions (ESA)
Current use and main requirements on geared actuators in ESA projects -Science and Earth observation missions (ESA)
16:10 - 16:20
Room: Newton

16:20 Presentation of ESA harmonization dossier -geared actuators (ESA)
Presentation of ESA harmonization dossier -geared actuators (ESA)
16:20 - 16:35
Room: Newton

16:35 Break
Break
16:35 - 16:55
Room: Newton

16:55 Round Table introduction (ESA)
Round Table introduction (ESA)
16:55 - 17:05
Room: Newton

17:05 Round table discussion
Round table discussion
17:05 - 18:50
Room: Newton

18:50 Wrap up Workshop
Wrap up Workshop
18:50 - 19:00
Room: Newton
Thursday, 16 June 2016

09:00 Introduction by TEC-MSM
Introduction by TEC-MSM
09:00 - 09:10
Room: Newton

09:10 Ongoing and Future Activities at ESTL
Ongoing and Future Activities at ESTL
09:10 - 09:50
Room: Newton

09:50 Development of Advanced Lubricants for Space Mechanisms Based on Ionic Liquids (ESTL)
Development of Advanced Lubricants for Space Mechanisms Based on Ionic Liquids (ESTL)
09:50 - 10:15
Room: Newton

10:15 Recent Activities on Fluid Lubrication (ESTL)
Recent Activities on Fluid Lubrication (ESTL)
10:15 - 10:40
Room: Newton

10:40 Morphology and Frictional Behaviour of Candidate PVD Films for Lead Replacement (ESTL)
Morphology and Frictional Behaviour of Candidate PVD Films for Lead Replacement (ESTL)
10:40 - 11:10
Room: Newton

11:10 Break
Break
11:10 - 11:55
Room: Newton

11:55 Pre-development of scan mechanism for Metop SG (Sener)
Pre-development of scan mechanism for Metop SG (Sener)
11:55 - 12:25
Room: Newton

12:25 Development of TAS G3 Solar array drive mechanism -Artes 5 project (TAS-F)
Development of TAS G3 Solar array drive mechanism -Artes 5 project (TAS-F)
12:25 - 13:00
Room: Newton

13:00 Lunch
Lunch
13:00 - 14:00
Room: Newton

14:00 TDS-1 In-orbit microvibration experiment (SSTL)
TDS-1 In-orbit microvibration experiment (SSTL)
14:00 - 14:25
Room: Newton

14:25 MicroMAp – Microvibration Management Approach (OHB)
MicroMAp – Microvibration Management Approach (OHB)
14:25 - 15:30
Room: Newton

15:30 ESA's new 6 DoF Micro-Vibration Measurement System (ESA)
ESA's new 6 DoF Micro-Vibration Measurement System (ESA)
15:30 - 15:50
Room: Newton

15:50 ASM for Intersatellite Link Antenna (Airbus DS)
ASM for Intersatellite Link Antenna (Airbus DS)
15:50 - 16:10
Room: Newton

16:10 Break
Break
16:10 - 16:50
Room: Newton

16:50 MEFISTO : A fast steering mirror mechanism for filet compensation (CEDRAT)
MEFISTO : A fast steering mirror mechanism for filet compensation (CEDRAT)
16:50 - 17:15
Room: Newton

17:15 Harmonic Drive Gears Evaluation Using European Space Lubricants - results fo Artes 5 project (Harmonic Drive A.G.)
Harmonic Drive Gears Evaluation Using European Space Lubricants - results fo Artes 5 project (Harmonic Drive A.G.)
17:15 - 17:40
Room: Newton

17:40 Versatile Test Bench for Gear Components Testing (Karl Rejlek GmbH)
Versatile Test Bench for Gear Components Testing (Karl Rejlek GmbH)
17:40 - 18:05
Room: Newton

18:05 Zero-gravity test of breadboard of a Sampling tool mechanism for low gravity bodies (AVS)
Zero-gravity test of breadboard of a Sampling tool mechanism for low gravity bodies (AVS)
18:05 - 18:25
Room: Newton
Friday, 17 June 2016

09:00 Fressco (FREtting Shaker Simulation Chamber for take Off) - introduction to a new vacuum test device for detection of cold welding under vibrations/fretting (AAC Austria)
Fressco (FREtting Shaker Simulation Chamber for take Off) - introduction to a new vacuum test device for detection of cold welding under vibrations/fretting (AAC Austria)
09:00 - 09:25
Room: Newton

09:25 Fluid Synergy of MoS2 Lubrication (ESTL)
Fluid Synergy of MoS2 Lubrication (ESTL)
09:25 - 09:50
Room: Newton

09:50 Oil and Grease Performance after Bakeout
Oil and Grease Performance after Bakeout
09:50 - 10:15
Room: Newton

10:15 Validity of Accelerated Testing for Self-Lubricating Materials (ESTL)
Validity of Accelerated Testing for Self-Lubricating Materials (ESTL)
10:15 - 10:35
Room: Newton

10:35 Break
Break
10:35 - 11:20
Room: Newton

11:20 Z-Damper: A new breakthrough technology for vibration damping (Magsoar SL)
Z-Damper: A new breakthrough technology for vibration damping (Magsoar SL)
11:20 - 11:45
Room: Newton

11:45 Development of a low-cost, low microvibration CMG for small agile satellite applications (SSC)
Development of a low-cost, low microvibration CMG for small agile satellite applications (SSC)
11:45 - 12:10
Room: Newton

12:10 Intermediate results of Non-explosive low shock system development - NELS (Airbus DS)
Intermediate results of Non-explosive low shock system development - NELS (Airbus DS)
12:10 - 12:35
Room: Newton

12:35 Coplanar symetry based rotation sensor (Emxys)
Coplanar symetry based rotation sensor (Emxys)
12:35 - 12:55
Room: Newton

12:55 Lunch
Lunch
12:55 - 14:00
Room: Newton

14:00 Reliability of mechanical systems and parts (Space structures GmbH)
Reliability of mechanical systems and parts (Space structures GmbH)
14:00 - 14:25
Room: Newton

14:25 Drill head prototypes for deep coring operations in planetary environment (AGH University of Science and Technology)
Drill head prototypes for deep coring operations in planetary environment (AGH University of Science and Technology)
14:25 - 14:50
Room: Newton

14:50 Wrap-up FPD 2016 (ESA)
Wrap-up FPD 2016 (ESA)
14:50 - 15:00
Room: Newton