Workshop on Gear Technology and Mechanisms Final Presentation Days 2016

Europe/Amsterdam
Newton (ESTEC)

Newton

ESTEC

Keplerlaan 1 2201 AZ Noordwijk The Netherlands
Adam Tvaruzka (TEC-MS)
Description

For information on 2017 events:

Mechanisms Final Presentation Days

and

Workshop on Mechanisms Testing and Health Monitoring

please refer to web pages:

http://esaconferencebureau.com/2017-events/17m05a/home

http://esaconferencebureau.com/2017-events/17m05/home

 

 

Workshop on Gear Technology

will take place at ESA/ESTEC - Noordwijk, The Netherlands, Newton room on the 15th of June 2016.

The Workshop will give European entities in industry and academic institutions the opportunity to present and discuss their latest research and development related to gear design, in particular:

  • Software to design gears
  • Lubrication, materials, heat and surface treatments
  • Mechanical and life testing
  • Geometrical alignment

Representatives of the European space community are encouraged to participate in the workshop, which aims at reviewing, discussing and promoting the related approaches and competences in this domain of space mechanisms. 

A discussion forum and an optional exhibition of hardware and software items will be offered.

The workshop will be followed by:

Mechanisms Final Presentation Days 2016

which will also take place at ESA/ESTEC - Noordwijk, The Netherlands, Newton room on the 16th and 17th of June 2016.

The ESA Mechanisms section hosts the annual Final Presentation Days to disseminate the results of research and development activities to interested parties from the ESA member states. The Final Presentation Days represent an opportunity to gain a complete overview of recently completed activities, and the possibility to discuss them with colleagues from the space mechanisms community.

Venue

ESA/ESTEC - Noordwijk, The Netherlands. Newton room.

Please click on the link to be directed to the ESA webpage with instructions how to get to ESTEC.

Presentations

Proposals for presentations at both events should be sent in the form of a short abstract. The abstract should not exceed two pages, including any figures.
Please indicate the title of the presentation, the author(s) and the affiliation at the top of the abstract.

There are no specific requirements to the layout and format of the abstracts. However, submission in the form of Microsoft® Word or PDF is preferred.

Please submit the abstracts, by Friday 20th of May, to the following e-mail addresses:

adam.tvaruzka@esa.int  and  florian.liebold@esa.int

Questions regarding the abstract submission process should be directed to the same e-mail addresses.

No official proceedings will be published, however the presentations will distributed to the participants after the event.
 

Contact

Workshop and Final Presentation Days related questions:

Mr. Adam Tvaruzka

adam.tvaruzka@esa.int

+31 71 565 6347

Registration contact:

Mrs. Julie Rocks

julie.rocks@esa.int

+31 71 565 4623

 

 

 

 

Participants
  • Adam Jan Zwierzynski
  • Alessandro Bursi
  • Andreas Hergesell
  • Anthony Kent
  • Artur Patala
  • Bart Paijmans
  • Bartosz Postulka
  • Beat Zahnd
  • Beate Bergrath
  • Ben Kohnen
  • Benjamin Kawak
  • Betty CABON
  • Carlos Compostizo
  • Carlos Perestrelo
  • Chiel Verhoeven
  • Christian Dupuy
  • Christian Neugebauer
  • CHRISTOPHE THOMAS
  • Claudia Allegranza
  • CRISTINA Ortega
  • Cyrille LEBRETON
  • Daria Calangiu
  • David Graça
  • Dhafer GHRIBI
  • EIDER OCERIN
  • Emanuele Piersanti
  • Eric Verpalen
  • Fernando Romera Juarez
  • Florian Seguin-Henry
  • FRANCOIS BARILLOT
  • Frank Steier
  • Geert Smet
  • Gema Rodriguez
  • Giorgio Parzianello
  • Gregor Puchhammer
  • Gregory LADUREE
  • Guillaume Chambon
  • Hannah England
  • Higinio Alavés Mañogil
  • Horst Kozilek
  • Ignacio Valiente-Blanco
  • Ivar te Kloeze
  • Jan Debille
  • Jan Michael Staub
  • Jean-Luc Bozet
  • Jeroen Augustijn
  • Jeroen Vandersteen
  • Johan A. Mürer
  • Johannes Kreuser
  • Jorge Vazquez
  • Karol Seweryn
  • Kevin te Rietmolen
  • Laurent Britte
  • Luca Pernechele
  • Lucio Scolamiero
  • Manfred Falkner
  • MANUEL SERRANO
  • Mario Toso
  • MARK FERRIS
  • Markus Jansson
  • Massimo Palladino
  • Massimo Saverdi
  • Mathias Gumy
  • Matthew Hampson
  • Matthias Schulke
  • Matúš Duňa
  • Michael Buttery
  • Michael Yorck
  • Michel OCTRUE
  • Mike Anderson
  • MILER Mickael
  • Mélanie Henry
  • Nikolay Asmolovskiy
  • Oliver Poyntz-Wright
  • Paolo Zaltron
  • Pavel Sobotka
  • Phil Allen
  • Philippe Schwab
  • Phillip Howard
  • Rafael Bureo Dacal
  • Reiner Barho
  • Ricardo Couto
  • Richard Briet
  • Rob Barton
  • Robert Bachmann
  • Rodrigo Ferreira
  • Roland Holzbauer
  • Roland Zenger
  • Ronan LE LETTY
  • Ronny Kaeso
  • Samo Simonian
  • Sandro Liberatoscioli
  • Sandro Patti
  • Sebastian Brunner
  • Sebastian Flock
  • Simon Lewis
  • Simon McLaren
  • Simon Troendle
  • Smith Joseph
  • Stefan Dittenhauser
  • Stefan Dutre
  • Stefan Wiegand
  • Steffen Recktenwald
  • Steven Stanley
  • Stig Saelebakke
  • Thierry Blais
  • Thomas Knodel
  • Tomasz Buratowski
  • Wojciech Teper
  • Xavier Francois
    • 09:30 09:40
      Welcome and introduction By TEC-MSM 10m
    • 09:40 10:05
      ESTL Experiences with developing and testing of gears for space 25m
      Slides
    • 10:05 10:30
      CETIM insitute presentation 25m
      Slides
    • 10:30 10:55
      KissSoft gear design software presentation 25m
      Slides
    • 10:55 11:25
      Break 30m
    • 11:25 11:45
      New ceramic dynamometer dedicated to measurement of exported microvibrations (Kistler) 20m
      Slides
    • 11:45 12:05
      Influence of pre-treatments on performance of solid lubricants -with focus on low temperature application:Mars (AAC Austria) 20m
      Slides
    • 12:05 12:35
      Critical Factors Relating to Gearbox Performance - How to Specify a Gearbox for Application Success (Reliance Precision Limited) 30m
      Slides
    • 12:35 13:00
      Dry lubricated gearbox development (Lidax) 25m
      Slides
    • 13:00 14:00
      Lunch 1h
    • 14:00 14:30
      Harmonic drive gears for space -past experience, typical customer inquires, main requirements (Harmonic Drive A.G.) 30m
      Slides
    • 14:30 14:55
      Lessons Learnt from latest Projects using Spur Gears, Expectations from gear/gearbox subcontractors, ESA R&D (Airbus DS) 25m
      Slides
    • 14:55 15:25
      Break 30m
    • 15:25 15:45
      Sources of noise and vibrations in gears (Siemens NV Belgium) 20m
      Slides
    • 15:45 16:10
      Gear transmission error measurement accuracy using low-cost digital encoders (Siemens NV Belgium) 25m
      Slides
    • 16:10 16:20
      Current use and main requirements on geared actuators in ESA projects -Science and Earth observation missions (ESA) 10m
    • 16:20 16:35
      Presentation of ESA harmonization dossier -geared actuators (ESA) 15m
      Slides
    • 16:35 16:55
      Break 20m
    • 16:55 17:05
      Round Table introduction (ESA) 10m
    • 17:05 18:50
      Round table discussion 1h 45m
      Slides
    • 18:50 19:00
      Wrap up Workshop 10m
    • 09:00 09:10
      Introduction by TEC-MSM 10m
      Slides
    • 09:10 09:50
      Ongoing and Future Activities at ESTL 40m
      Slides
    • 09:50 10:15
      Development of Advanced Lubricants for Space Mechanisms Based on Ionic Liquids (ESTL) 25m
      Slides
    • 10:15 10:40
      Recent Activities on Fluid Lubrication (ESTL) 25m
      Slides
    • 10:40 11:10
      Morphology and Frictional Behaviour of Candidate PVD Films for Lead Replacement (ESTL) 30m
      Slides
    • 11:10 11:55
      Break 45m
    • 11:55 12:25
      Pre-development of scan mechanism for Metop SG (Sener) 30m
      Slides
    • 12:25 13:00
      Development of TAS G3 Solar array drive mechanism -Artes 5 project (TAS-F) 35m
      Slides
    • 13:00 14:00
      Lunch 1h
    • 14:00 14:25
      TDS-1 In-orbit microvibration experiment (SSTL) 25m
      Slides
    • 14:25 15:30
      MicroMAp – Microvibration Management Approach (OHB) 1h 5m
      Slides
    • 15:30 15:50
      ESA's new 6 DoF Micro-Vibration Measurement System (ESA) 20m
      Slides
    • 16:10 16:50
      Break 40m
    • 16:50 17:15
      MEFISTO : A fast steering mirror mechanism for filet compensation (CEDRAT) 25m
      Slides
    • 17:15 17:40
      Harmonic Drive Gears Evaluation Using European Space Lubricants - results fo Artes 5 project (Harmonic Drive A.G.) 25m
      Slides
    • 17:40 18:05
      Versatile Test Bench for Gear Components Testing (Karl Rejlek GmbH) 25m
      Slides
    • 18:05 18:25
      Zero-gravity test of breadboard of a Sampling tool mechanism for low gravity bodies (AVS) 20m
      Slides
    • 09:00 09:25
      Fressco (FREtting Shaker Simulation Chamber for take Off) - introduction to a new vacuum test device for detection of cold welding under vibrations/fretting (AAC Austria) 25m
      Slides
    • 09:25 09:50
      Fluid Synergy of MoS2 Lubrication (ESTL) 25m
      Slides
    • 09:50 10:15
      Oil and Grease Performance after Bakeout 25m
      Slides
    • 10:15 10:35
      Validity of Accelerated Testing for Self-Lubricating Materials (ESTL) 20m
      Slides
    • 10:35 11:20
      Break 45m
    • 11:20 11:45
      Z-Damper: A new breakthrough technology for vibration damping (Magsoar SL) 25m
      Slides
    • 11:45 12:10
      Development of a low-cost, low microvibration CMG for small agile satellite applications (SSC) 25m
    • 12:10 12:35
      Intermediate results of Non-explosive low shock system development - NELS (Airbus DS) 25m
      Slides
    • 12:35 12:55
      Coplanar symetry based rotation sensor (Emxys) 20m
      Slides
    • 12:55 14:00
      Lunch 1h 5m
    • 14:00 14:25
      Reliability of mechanical systems and parts (Space structures GmbH) 25m
      Slides
    • 14:25 14:50
      Drill head prototypes for deep coring operations in planetary environment (AGH University of Science and Technology) 25m
      Slides
    • 14:50 15:00
      Wrap-up FPD 2016 (ESA) 10m