Name: Clean Space Industrial Days 2018
Start: 2018-10-23T08:00:00+02:00
End: 2018-10-25T18:30:00+02:00
Location: ESTEC

Clean Space Industrial Days 2018

from Tuesday, October 23, 2018 (8:00 AM) to Thursday, October 25, 2018 (6:30 PM)

Monday, October 22, 2018
Tuesday, October 23, 2018

10:00 AM Opening of the Clean Space Industrial Days
Opening of the Clean Space Industrial Days
10:00 AM - 10:30 AM
Room: Erasmus building Mr Franco Ongaro, Director of Technology, Engineering and Quality will launch the 2018 Clean Space Industrial Days

10:30 AM EcoDesign for space: a utopia?
EcoDesign for space: a utopia?
10:30 AM - 11:10 AM
Room: Erasmus building

11:40 AM Space Debris Mitigation: threat or opportunity?
Space Debris Mitigation: threat or opportunity?
11:40 AM - 12:20 PM
Room: Erasmus building

12:20 PM Debris Removal: an enable for in-orbit servicing?
Debris Removal: an enable for in-orbit servicing?
12:20 PM - 1:00 PM
Room: Erasmus building
2:00 PM ADR & SSV: SYSTEM
ADR & SSV: SYSTEM
2:00 PM - 3:30 PM
Room: Erasmus building
Contributions

2:00 PM e.Deorbit and the Space Servicing Vehicle - Andrew Wolahan (ESA)

2:30 PM Capturing and deorbiting Envisat with an Airbus Spacetug. Results from the ESA e.deorbit Consolidation Phase study. - Stéphane Estable (Airbus)

3:00 PM RemoveDebris Preliminary Mission Results - Ben Taylor (University of Surrey)
ECODESIGNING A SPACE MISSION
ECODESIGNING A SPACE MISSION
2:00 PM - 3:30 PM
Room: Erasmus building
Contributions

2:00 PM EcoDesign at ESA - Sara Morales Serrano

2:30 PM GreenSat - Nicolas Thiry (Thales Alenia Space) Pierre-Alexis Duvernois (Deloitte Sustainability) Augustin Chanoine (Deloitte Sustainability)

3:00 PM GreenSat: ecodesign of the PROBA-V mission - An Vercalsteren (VITO)
System Approach to SDM
System Approach to SDM
2:00 PM - 3:40 PM
Room: Erasmus building
Contributions

2:00 PM ESA CleanSat roadmap - Tiago Soares (ESA)

2:20 PM SDM Requirement for future Sentinels - Guido Levrini (ESA)

2:40 PM CNES initiative : Tech for Space Care - Pierre Omaly (CNES)

3:00 PM AIRBUS LEO Platforms compliance to SDM - Saturnino VAL SERRA (Airbus Defence and Space) Daniel BRIOT (Airbus Defence and Space)

3:20 PM TAS LEO platforms compliance to SDM - Nicolas Thiry (Thales Alenia Space)
4:00 PM ADR & SSV: SYSTEM
ADR & SSV: SYSTEM
4:00 PM - 5:30 PM
Room: Erasmus building
Contributions

4:00 PM Astroscale’s ELSA-d Mission and ESA Support Mechanisms - Jason Forshaw (Astroscale)

4:30 PM SPACE DRONE™ Adaptable Servicing Spacecraft - Danna Linn Barnett (Effective Space Solution)

5:00 PM Active Debris Removal : a possible solution for Mega constellations - carole Billot (Thales Alenia Space)
LCA OF SPACE MISSIONS
LCA OF SPACE MISSIONS
4:00 PM - 5:30 PM
Room: Erasmus building
Contributions

4:00 PM Environmental Life Cycle Impact Analysis of A6 in Exploitation Phase - Aurélie Gallice (ArianeGroup)

4:30 PM Life Cycle Assessment of Ground Segment in space sector - MICHELE DE SANTIS (Rina Consulting S.p.A.)

5:00 PM ARA-Atmospheric Re-entry Assessment - Simone Bianchi (Thales Alenia Space)
IN-ORBIT BREAK-UP (Passivation and Vulnerability)
IN-ORBIT BREAK-UP (Passivation and Vulnerability)
4:00 PM - 5:30 PM
Room: Erasmus building
Contributions

4:00 PM Battery safety and passivation - Mathilde Aouizerate (Airbus)

4:20 PM Batteries explosive properties characterization for LEO Satellites - Bartosz Jakusz (Jakusz SpaceTech Sp. z o.o.)

4:40 PM ESA overview of Fluidic Passivation State of the Art and available passivation valves - Andreas Gernoth (ESA)

5:00 PM Numerical Simulations for Spacecraft Catastrophic Disruption Analysis - Martin Schimmerohn (Fraunhofer EMI)
6:00 PM Long-term Sustainability of Outer Space Activities
Long-term Sustainability of Outer Space Activities
6:00 PM - 7:00 PM
Room: Erasmus building
Contributions

6:00 PM Long-Term Sustainability of Space Activities - Alexander Soucek

6:30 PM Committee on the Peaceful Uses of Outer Space & Guidelines for the long-term sustainability of outer space activities - Tanya Keusen (United Nations Office for Outer Space Affairs (UNOOSA))
7:00 PM Social event: Dinner
Social event: Dinner
7:00 PM - 9:00 PM
Room: Erasmus building
Wednesday, October 24, 2018
9:00 AM the legal aspect of servicing
the legal aspect of servicing
9:00 AM - 9:30 AM
Room: Erasmus building
Contributions

9:00 AM On-orbit satellite servicing / Close Proximity Operations Legal aspects - Alexander Soucek
9:30 AM GREEN TECHNOLOGIES
GREEN TECHNOLOGIES
9:30 AM - 11:00 AM
Contributions

9:30 AM Umicore’s strategy to increase Germanium resource efficiency for future low-carbon space multijunction solar cell technology - Rufi Kurstjens (Umicore)

10:00 AM Compatibility of welded propellant systems with new green propellants - Chris Smith (European Astrotech Ltd) Sammy Graham (European Astrotech)

10:30 AM Environmentally friendly polyurethane materials for space applications - Ugis Cabulis (Latvian State Institute of Wood Chemistry)
close proximity operations
close proximity operations
9:30 AM - 11:00 AM
Room: Erasmus building
Contributions

9:30 AM Close-Proximity Operations - Andrew Wolahan (ESA)
11:30 AM REACH AND CRITICAL MATERIAL INTO LCA
REACH AND CRITICAL MATERIAL INTO LCA
11:30 AM - 12:30 PM
Contributions

11:30 AM Integrating CRM obsolescence risks into the pre-design stages of space missions - Pierre-Alexis Duvernois (Deloitte)

12:00 PM Integrating REACH obsolescence risks into the pre-design stages of space missions - Augustin Chanoine (Deloitte)
Design for removal
Design for removal
11:30 AM - 1:00 PM
Room: Erasmus building
Contributions

11:30 AM Interactive session: Design for removal - Luisa Innocenti (ESA)

12:30 PM Space Debris, waste or value? - Frank Koch (Orbit Recycling)
2:00 PM GNC
GNC
2:00 PM - 3:30 PM
Room: Erasmus building
Contributions

2:00 PM Guidance, Navigation & Control building blocks for Space Servicing Vehicles and Active Debris Removal missions - Jesus Gil (ESA/ESTEC)

2:20 PM Spectral imagers for relative navigation, on-orbit servicing and debris removal - Marco Esposito (cosine Research BV)

2:40 PM The RVS3000 rendezvous and docking sensor technology - Hans Knut Raue (Jena-Optronik GmbH)

3:00 PM COMRADE - Fully Combined Control for Active Debris Removal - Joao Branco (GMV)
ECODESIGN: THE TOOLS
ECODESIGN: THE TOOLS
2:00 PM - 3:40 PM
Room: Erasmus building
Contributions

2:00 PM Harmonized space LCA data for efficient ecodesign - Johan Berg Pettersen (Norwegian University of Science and Technology (NTNU))

2:20 PM The Strathclyde Space Systems Database: Life Cycle Sustainability Results of the MÌOS Mission - Andrew Ross Wilson (University of Strathclyde)

2:40 PM EPFL first steps toward the Eco Design of the CleanSpace One satellite - Muriel Richard-Noca (EPFL Space Center)

3:00 PM User experience of the ESA LCA Handbook and database - Katrien Boonen (VITO)
DESIGN FOR DEMISE
DESIGN FOR DEMISE
2:00 PM - 3:30 PM
Room: Erasmus building
Contributions

2:00 PM Improved Understanding of Reaction Wheel Demise through Testing and Analysis Within the ReDSHIFT Project - James Beck (Belstead Research Ltd)

2:30 PM Methodology and results of demisability testing for state-of-the-art structural joining technologies - Mark Fittock (OHB)

3:00 PM Exothermic reaction aided spacecraft demise - Geert Smet (ESA)
4:00 PM Robotics
Robotics
4:00 PM - 6:00 PM
Room: Erasmus building
Contributions

4:00 PM ESA - Gianfranco Visentin (ESA)

4:20 PM Compliant control of the robotic arm during clamping operation in the e.Deorbit mission - Tomasz Rybus (Space Research Centre (CBK PAN))

4:40 PM I3DS: Integrated 3D Sensor Suit for On-Orbit Servicing - Jaroslaw Jaworski (PIAP)

5:00 PM Pre-Development of the Clamping Mechanism for e.Deorbit mission - Iñigo Sard (AVS)

5:20 PM Development of clamping mechanism for Active Debris Removal missions and Space Servicing Vehicles - Marcin Wygachiewicz (SENER Sp. z o.o.) Karolina Podulka (SENER Sp. z o.o.)

5:40 PM Robotics Technologies Enabling the Nascent Commercial On-Orbit Servicing Market - Gregory Peckover (MDA)
ECODESIGN: SPACE DEBRIS INDEX
ECODESIGN: SPACE DEBRIS INDEX
4:00 PM - 5:30 PM
Room: Erasmus building
Contributions

4:00 PM Assessing the impact of space debris on the orbital resource in LCA: a proposed method and case study - Thibaut Maury (Ariane Group / Univ. Bordeaux)

4:30 PM A debris index as a metric of the environment capacity - Francesca Letizia (European Space Agency)

5:00 PM Assessing the potential loss of value on the orbital resource caused by Space Debris: towards an LCA endpoint characterisation - Alexandre Maynard (université de Bordeaux)
DESIGN FOR DEMISE
DESIGN FOR DEMISE
4:00 PM - 5:30 PM
Room: Erasmus building
Contributions

4:00 PM Initial Considerations for Re-entry Breakup Experiment - James Merrifield (Fluid Gravity Engineering)

4:20 PM Demisability analysis of Solar Array Drive Mechanism - Patrik Kärräng (Hyperschall Technologie Göttingen (HTG))

4:40 PM Demisable Tank - Sylvain Goek (ArianeGroup)

5:00 PM Demisability analysis of Reaction Wheels - Markus Ehinger (RockwellCollins) Patrik Kärräng (Hyperschall Technologie Göttingen (HTG))
6:00 PM DESIGN FOR DEMISE
DESIGN FOR DEMISE
6:00 PM - 7:00 PM
Room: Erasmus building
Contributions

6:00 PM New Design for Demise technology concepts for structural joining technologies - Mark Fittock (OHB)

6:20 PM Demisable Joint - Lilith Grassi (Thales Alenia Space)

6:40 PM ALTRAN_D4D Building Blocks - Evolutions & Way Forward - Stephane HEINRICH (ALTRAN)
Thursday, October 25, 2018
9:00 AM Presentation of DRAMA (version 3) and ESTIMATE
Presentation of DRAMA (version 3) and ESTIMATE
9:00 AM - 9:30 AM
Room: Erasmus building
Contributions

9:00 AM SpaceDebrisMitigation: Methods Master8, Drama3 and Estimate - Stijn Lemmens (European Space Agency)
9:30 AM DESIGN FOR DEMISE
DESIGN FOR DEMISE
9:30 AM - 11:10 AM
Room: Erasmus building
Contributions

9:30 AM Probabilistic modelling of space object controlled reentry and ground risk estimation - Francois Sanson (Inria)

10:00 AM LATEST IMPROVEMENTS ON THE CNES SPACECRAFT-ORIENTED TOOL: PAMPERO - Julien ANNALORO (CNES)

10:30 AM Probabilistic Assessment of Destructive Re-entry - James Beck (Belstead Research Ltd)
10:00 AM Workshop: responsibility and sustainability in the space sector
Workshop: responsibility and sustainability in the space sector
10:00 AM - 1:00 PM
Room: Erasmus building
11:30 AM RELIABILITY
RELIABILITY
11:30 AM - 1:00 PM
Room: Erasmus building
Contributions

12:30 PM Reliability model and criteria supporting satellite life extension and safe disposal - Lorenzo Bitetti (Thales Alenia Space)
2:00 PM ATD Meeting
ATD Meeting
2:00 PM - 5:00 PM
Room: Erasmus building
DEORBITING TECHNOLOGIES
DEORBITING TECHNOLOGIES
2:00 PM - 3:40 PM
Room: Erasmus building
Contributions

2:00 PM An introduction to the Semi-Controlled Re-Entry concept and demonstration of its performance - Nicolas Lévêque (Airbus Defence and Space) Kristen Lagadec (Airbus Defence and Space)

2:20 PM Controlled re-entry trade-off for LEO satellites - Sébastien Perrault

2:40 PM Current status of Pre-Qualification of Aluminium-Free Solid Propellant - Pawel Nowakowski (Institute of Aviation)

3:00 PM TeSeR – Technology for Self-Removal – Status of a Horizon 2020 Project to Ensure the Post Mission Disposal of Future Spacecraft - Cornelius Vogt (Airbus Defence and Space)

3:20 PM Novel Thrust Vectoring Mechanism Design for Controlled De-Orbiting based on Solid Rocket Motor Propulsion - Anett Krammer (Almatech) Fabrice Rottmeier (Almatech)
4:00 PM Space Debris Mitigation for Small Satellites
Space Debris Mitigation for Small Satellites
4:00 PM - 5:30 PM
Room: Erasmus building
Contributions

4:00 PM Lessons learnt from the past three years of activity in Space Debris - Stefano Antonetti (D-ORBIT) Eleonora Luraschi (D-ORBIT)

4:20 PM The ADEO Passive De-Orbit Subsystem: Reference Mission Selection and Preliminary Design of Proto Flight Model - Thomas Sinn (HPS GmbH)

4:40 PM ARTICA: Cubesat deorbiting system - Niccolò Bellini (NPC New Production Concept)

5:00 PM Effects of passive de-orbiting with sails on the space debris environment - Camilla Colombo (Politecnico di Milano)

Choose timezone