Name: 2021 Clean Space Industrial Days
Start: 2021-09-20T13:00:00+02:00
End: 2021-09-24T13:00:00+02:00
Location: No location set

2021 Clean Space Industrial Days

from Monday, 20 September 2021 (13:00) to Friday, 24 September 2021 (13:00)

Monday, 20 September 2021
15:00 Opening of the Clean Space Industry Days
Opening of the Clean Space Industry Days
15:00 - 16:30
Contributions

15:00 Welcome and Opening - Holger Krag

15:10 ESA's Agenda 2025 - Rolf Densing (ESA)

15:25 The Space Safety Programme - Holger Krag

15:40 Clean Space: an asset to reach Agenda's 2025's goals - Luisa Innocenti (ESA)

15:55 EO satellites: our best asset to understand climate change? - Guido Levrini (ESA)

16:10 Wrap Up - Luisa Innocenti (ESA)
Tuesday, 21 September 2021
09:30 In-Orbit Servicing: missions & preparation
In-Orbit Servicing: missions & preparation
09:30 - 11:00
Contributions

09:30 A definition of In-Orbit Servicing presented by ESA - Andrew Wolahan (ESA)

09:45 ADRIOS/ClearSpace-1: Overview and Status - Muriel Richard-Noca (ClearSpace SA)

10:00 ELSA-d: Mission design and performance to date - Stephen Wokes (Astroscale)

10:15 ACTIVE DEBRIS RECOVERY SYSTEM FOR LEO COMMUNICATIONS MISSIONS - Francisco Javier Atapuerca Rodríguez de Dios (GMV Innovating Solutions S.A.U.)

10:30 Deorbit Kits as a Building Block of a Space Servicing and Logistics Infrastructure - Stefano Antonetti (D-ORBIT)
Ecodesign at ESA
Ecodesign at ESA
09:30 - 11:00
Contributions

09:30 Introduction - Sara Morales Serrano (ESA)

09:50 Ecodesign : where does ESA stand? - Estefanía Padilla (ESA (ESOC)) Romane Prouteau Sara Morales Serrano (ESA)
Current challenges and future solutions in LEO and GEO
Current challenges and future solutions in LEO and GEO
09:30 - 11:00
Contributions

09:30 Current challenges and future solutions in LEO and GEO
11:30 In-Orbit Servicing: missions & preparation
In-Orbit Servicing: missions & preparation
11:30 - 13:00
Contributions

11:30 Presentation of the Request for Information for In-Orbit Servicing - Antonio Caiazzo (ESA)

11:45 Airbus's vision for In-Orbit Servicing - Eugenio Ferreira (AIRBUS)

12:00 The future of In-Orbit Servicing - Sabrina Andiappane (Thales Alenia Space)

12:15 In-Orbit Services: AVIO vision. "1 or more Payloads up, 1 or more Services, 1 or more Payloads down for each mission" - Giorgio Gasbarrini (AVIO S.p.A.)

12:30 OHB's vision for In-Orbit Servicing - Michele Bonerba (OHB)
Non financial reporting
Non financial reporting
11:30 - 12:10
Contributions

11:30 Impacts of Directive 2014/95/EU on Environmental Impact Reporting by European Space Transportation Industry - Augustin Chanoine (Deloitte) Sylvain Blanchet Héloïse Tschora
ESA Space Debris Mitigation and Re-entry Safety Framework – Status and Novelties
ESA Space Debris Mitigation and Re-entry Safety Framework – Status and Novelties
11:30 - 12:00
Contributions

11:30 ESA Space Debris Mitigation and Re-entry Safety Framework – Status and Novelties - Sergio Ventura (ESA)
14:00 IODs for In-Orbit Servicing
IODs for In-Orbit Servicing
14:00 - 16:00
Contributions

14:00 PERIOD – PERASPERA In-Orbit Demonstrator for validating core on-orbit manufacturing, assembly and servicing operations - Stéphane Estable (Airbus)

14:15 The e.Inspector mission phase A results and technology challenges - Michelle Lavagna (Politecnico di Milano)

14:30 Autonomy and Software-Defined Distributed Architectures as Foundations for In-Orbit Servicing - Ignacio Chechile (ReOrbit) Chohan Neha (Systems Engineer) Sethu Saveda Suvanam (CEO)

14:45 Building autonomy in space: a prototyping platform for autonomous space missions - Arūnas Prokopas (Blackswan Technologies)

15:00 Initial user-driven framework for developing trade-off scenarios for space debris removal services - Stella Alexandrova (S-Cosmos)
LCA of Ground Segments
LCA of Ground Segments
14:00 - 15:00
Contributions

14:00 Life Cycle Assessment of Ground Segment in space sector - MICHELE DE SANTIS (Rina Consulting S.p.A.)

14:30 LCA of ground stations - Flavien COLIN Augustin Chanoine (Deloitte) Natacha Wonneberger (Deloitte)
Passivation for managing the spacecraft's end-of-life
Passivation for managing the spacecraft's end-of-life
14:00 - 15:30
Contributions

14:00 Passivation for managing the spacecraft's end-of-life
15:00 Environmental impacts of spacecraft demise
Environmental impacts of spacecraft demise
15:00 - 15:50
Contributions

15:00 Atmospheric Re-entry Assessment (ARA) - Simone Bianchi (Thales Alenia Space)

15:20 Environmental impacts of atmospheric emissions from spacecraft re-entry demise - Slimane Bekki (Imperial College/CNRS)

15:40 Q&As
16:00 ESA Life-Cycle Assessment Database
ESA Life-Cycle Assessment Database
16:00 - 17:00
Contributions

16:00 Introduction to the ESA LCA Database - Clean Space team

16:10 ESA LCA Database - a guided tour - Johan Berg Pettersen (NTNU (Norwegian University of Science and Technology))

16:40 ESA LCA database - Ionut Grozea (SC DEIMOS SPACE SRL) MICHELE DE SANTIS (Rina Consulting S.p.A.) Andrew Wilson (University of Strathclyde)
Design for Demise: Models
Design for Demise: Models
16:00 - 17:50
Contributions

16:00 Overview of the Design for Demise existing models - Antonio Caiazzo (ESA) Stijn Lemmens (European Space Agency)

16:20 LATEST EVOLUTION OF THE SPACECRAFT-ORIENTED CODE PAMPERO - Martin Spel (R.TECH)

16:40 Determination of failure criteria for spacecraft structures during re-entry - Bent Fritsche (HTG)

17:00 Destructive Re-entry Assessment Container Object - DRACO
Wednesday, 22 September 2021
09:30 LCA & Ecodesign in ESA projects
LCA & Ecodesign in ESA projects
09:30 - 11:00
Contributions

09:30 LCA & Ecodesign in ESA projects
Design for Demise: Models
Design for Demise: Models
09:30 - 11:30
Contributions

09:30 Equipment level demise analysis with SCARAB - Patrik Kärräng (Hyperschall Technologie Göttingen (HTG))

09:50 Progress in the Understanding and Modelling of Destructive Re-entry - James Beck (Belstead Research Ltd)

10:10 Heat Flux Measurement on Spinning Test Models in Hypersonics - Sebastian Willems (German Aerospace Center (DLR))

10:30 Dynamic Experimental Simulation of the Demise during Re-Entry Flight - Thorn Schleutker (German Aerospace Center DLR)

10:50 Current status and evolution of D4D modelling at FGE - James Merrifield (Fluid Gravity Engineering)
10:00 Feared events of CPO for IOS missions
Feared events of CPO for IOS missions
10:00 - 10:30
Contributions

10:00 Feared events of CPO for IOS missions - Robin Biesbroek (ESA)
11:30 Technologies for Servicer Vehicles: Robotics
Technologies for Servicer Vehicles: Robotics
11:30 - 13:00
Contributions

11:30 European Robotics for In-orbit Servicing Manufacturing and Assembly - Gianfranco Visentin (ESA)

11:40 Active debris removal by shape memory polymer composite devices - Loredana Santo

12:00 STAARK robotic arm for in-orbit robotic missions - Ricardo Ricardo Patricio (Made In Space Europe)

12:20 CAPTURE SYSTEM FOR SERVICING AND DEBRIS REMOVAL (CRUSSADER) - Angel Iglesias (Almatech SA)

12:40 Drone-Catcher: Non-destructive drones capture and retrieve - Alberto Landini (STAM s.r.l.)
LCA implemented in projects
LCA implemented in projects
11:30 - 12:30
Contributions

11:30 LCA and eco-design of a launch service based on a reusable launcher - Léonard Pineau (CNES-ArianeWorks)

12:00 Status and opportunities for sustainability and circular economy for clean space industry - Jamila Mendoza
Designing Demisable Spacecrafts
Designing Demisable Spacecrafts
11:30 - 13:10
Contributions

11:30 NOVEL DEMISABLE JOINTS - Martin Sauerbrey

11:50 High Altitude Break-up Concepts with Additively Manufactured CF-PEEK - Joel Patzwald (German Aerospace Center, RWTH Aachen University)

12:10 Demisable Solar Array Drive Mechanism - Njord Eggen (Kongsberg)

12:30 CONTAINMENT TECHNIQUES TO REDUCE SPACECRAFT RE-ENTRY FOOTPRINT - HEINRICH Stephane (eNOVA Aerospace)

12:50 Demisable Joint - Lilith grassi (Thales Alenia Space)
14:00 Technologies for Servicer Vehicles: GNC
Technologies for Servicer Vehicles: GNC
14:00 - 15:40
Contributions

14:00 Vision-Based Navigation sensors for Debris Removal - Manuel Sanchez Gestido (ESA)

14:20 Uncooperative Objects Effective Imaging through Flexible Flyaround Guidance - Andrea Brandonisio (Politecnico di Milano)

14:40 Assessment and comparison of conditions in vacuum with experiments in open air of thermal infrared cameras for use in Debris Removal - Béla Márton Somosvári

15:00 A robust and high performance multi-spectral camera system for visual based navigation with applications in Debris Removal and On-Orbit Servicing - Pierluigi Foglia Manzillo (cosine measurement systems)

15:20 Multispectral imaging to support close proximity navigation and target mapping - Gaia Letizia Civardi (Politecnico di Milano)
ESA LCA Handbook
ESA LCA Handbook
14:00 - 15:00
Contributions

14:00 LCA handbook - cleanspace team

14:10 Update of ESA LCA guidelines - Augustin Chanoine (Deloitte) Flavien COLIN Natacha Wonneberger

14:30 Discussion
Sustainability rating
Sustainability rating
14:00 - 14:30
Contributions

14:00 Space Sustainability Rating - Francesca Letizia (European Space Agency)
16:00 Technologies for Servicer Vehicles: GNC
Technologies for Servicer Vehicles: GNC
16:00 - 17:30
Contributions

16:00 GNC Sensors for in Orbit Servicing Missions - Lars Wagner (Jena-Optronik GmbH)

16:20 GNC and Autonomy Perspectives on Orbit Servicing, Assembly and Active Debris Removal - Pedro Lourenço (GMV, Space Segment and Robotics Business Unit, GNC/Robotics Division)

16:40 AI-aided Guidance and Navigation for Dynamics Reconstruction of Uncooperative Spacecraft - Stefano Silvestrini (Politecnico di Milano)

17:00 IOSHEXA: a hybrid payload adapter/spacecraft for in-orbit servicing - Marco Guerzoni (SAB Launch Services)

17:20 Real-time image rendering for simulation of thermal infrared cameras with application in Space Debris Removal - Iain Martin (University of Dundee)
Thursday, 23 September 2021
09:30 Green technologies
Green technologies
09:30 - 11:00
Contributions

09:30 Umicore’s strategy to increase Germanium resource efficiency for future low-carbon space multijunction solar cell technology - Rufi Kurstjens (Umicore)

10:00 Effective Use of Germanium - Peter Dold (Fraunhofer CSP)

10:30 Life Cycle Assessment of Green Electronics for Space - Maarten Cauwe (imec-Cmst)
Passive deorbit devices
Passive deorbit devices
09:30 - 11:00
Contributions

09:30 ADEO-N – Deployable Passive De-Orbit Sail Subsystem Enabling Space Debris Mitigation for CubeSats, SmallSats and Constellations - Philipp Laube (HPS GmbH) Daniel Stelzl (HPS GmbH)

10:00 Inflatable devices - Tiziana Cardone (ESA)

10:30 Deorbit Kit - modular solution for standardized satellite deorbit - Pyry Peitso (Aurora Propulsion Technologies)
11:30 ATD3 Workshop's presentation
ATD3 Workshop's presentation
11:30 - 12:30
Contributions

11:30 Introduction to Aerothermodynamics Design for Demise Workshop (ATD3) 2021 - Cristina De Persis (ESA) Orr Cohen
Green technologies
Green technologies
11:30 - 12:30
Contributions

11:30 Environmentally friendly polyurethane materials for space applications - Tomas Vlcek (TOSEDA s.r.o.)

11:50 Life cycle of propellants: environmental benchmark of current "green" propellants - Paul Schabedoth

12:10 LCA of alternative materials for optical payload - Ariane Bouilly (AirbusDS) Nicolas Mazollier (Cap Gemini)
Controlled reentry
Controlled reentry
11:30 - 13:00
Contributions

11:30 Controlled deorbit with Solid Rocket Motor with Thrust Vector Control - Ewa Majewska (Lukasiewicz Research Network – Institute of Aviation) Pawel Nowakowski (Lukasiewicz Research Network - Institute of Aviation)

12:00 D-Orbit: Designing of the Deorbit Kit for scalability and future use, and how to ensure compatibility with existing spacecraft - Diego Garces de Marcilla (D-Orbit UK)
14:00 IOS Enabling Technologies - OMAR
IOS Enabling Technologies - OMAR
14:00 - 15:30
Contributions

14:00 Presentation of OMAR - Antonio Caiazzo (ESA)

14:10 OMAR Mission Architecture Study - Britta Ganzer (OHB System AG)

14:40 On-orbit Servicing Satellite study - Nicolas Schaeffer

15:10 A Fully-Modular Coupling Kit Enabling OMAR and Beyond: The intelligent Space System Interface iSSI® by iBOSS - Joerg Kreisel (JKIC)
16:00 On-Orbit Manufacturing
On-Orbit Manufacturing
16:00 - 17:40
Contributions

16:00 Manufacturing in space for future sustainable space activities: drivers and perspectives - Advenit Makaya (European Space Agency)

16:10 Feasibility Study of Large-format, Freeform 3D Printing for On-orbit Additive Manufacturing - Declan Jonckers (TU Braunschweig, Institut für Raumfahrtsysteme)

16:40 The ForgeStar: A Fully Returnable In-Space Manufacturing Platform - Andrew Bacon (Space Forge)

17:10 PRELIMINARY DESIGN OF ON-ORBIT MANUFACTURING OF LARGE ANTENNA REFLECTORS - Romain Caujolle (Airbus Defence & Space)
Friday, 24 September 2021
09:30 Design for Removal
Design for Removal
09:30 - 11:35
Contributions

09:30 Design for Removal: an ESA definition - Tiago Soares (TEC-SYE)

09:55 Markers Supporting Navigation - Laszlo Szegedi (Admatis Ltd., Miskolc, Hungary)

10:20 MICE - Mechanical Interface for Capture at End-Of-Life. Design and Testing up to TRL-6 - Fernando Gandia (Abellan) Carmen Camañes (AVS) Andrés Rodríguez Reina (GMV) Íñigo Sard (AVS)

10:45 Passive Magnetic Detumbling of non-operational satellites in LEO to enable Active Debris Removal - Alain Benoit (ABSpaceConsulting) Andrey Kornienko (ESA/ESTEC) Steeve Kowaltschek (European Space Agency) Tiago Soares (TEC-SYE)

11:10 Spacecraft passive detumbling with MTB at end of life - Laia RAMIO TOMAS (Thalès)
11:35 Wrap up of the clean space industry days
Wrap up of the clean space industry days
11:35 - 11:45