Conveners
Custom Cell-, Circuit-, and System Design: (1/3)
- Marc Fossion (Thales Alenia Space Belgium)
Custom Cell-, Circuit-, and System Design: (2/3)
- Michael Kakoulin (IMEC)
Custom Cell-, Circuit-, and System Design: (3/3)
- Florence Malou (CNES)
Description
Custom cell-, circuit-, and system design of ICs for space applications Full custom digital, analogue, or mixed-signal: Front-end, Signal processing, Data converters, Receivers and transmitters, Drivers, or other.
-
Mr Ernesto Pun (ARQUIMEA)18/06/2018, 11:20Analogue intellectual property and re-usability of analogue circuits in spaceOral1. Summary/Abstract 2. Introduction 3. Design goals: 3.1. Requirements 3.2. Challenges 4. Architecture analysis: 4.1. Reused IPs 4.2. Block diagram 5. Project milestones 6. Conclusions 7. ReferencesGo to contribution page
-
Hans-Ulrich Zurek (Atmel-Microchip)18/06/2018, 11:45Space applications for analogue and mixed-signal ICsOralMicrochip Technology Inc. as a leading provider of microcontrollers for space application design is continuously proposing new devices for the space domain. In addition to an increased power-computing performance, the new generation of microcontrollers integrates more and more advanced analog functions. Use of the ATMX150RHA radiation hardened mixed technology for the development of the...Go to contribution page
-
Mr Fredrik Johansson (Cobham Gaisler)18/06/2018, 12:10Space applications for analogue and mixed-signal ICsOralABSTRACT This paper describes the mixed-signal microcontroller GR716 targeting embedded control applications with hard real-time requirements. Prototype devices are currently beeing tape-out in the activity Microcontroller for embedded space applications, initiated and funded by the European Space Agency (ESA). The presentation and paper will describe the mixed digital and analog...Go to contribution page
-
Mr Jan Wouters (Imec)18/06/2018, 16:00Space applications for analogue and mixed-signal ICsOralA radhard space-grade LVDS dual transmitter chip is designed. The functionality includes high input common mode voltage (-4 to 5V), high ESD immunity (8 kV), active failsafe operation (for Rx), and cold spare. To be able to realize this, at transistor level several novel techniques had to be applied; this paper will highlight several of these. **Rx**: failsafe: a novel architecture is used,...Go to contribution page
-
46. Correlators for Interferometric Radiometry in Remote Sensing Applications, A Scaling PerspectiveMr Erik Ryman (Omnisys Instruments AB)18/06/2018, 16:25Space applications for analogue and mixed-signal ICsOralCorrelators are extensively used in the field of radio interferometry. Two different types are considered for two applications; autocorrelators for spectrometry and cross-correlators for aperture synthesis. We concentrate on satellite-based applications where power budgets are very restrictive. Several satellites are already employing correlators for interferometric measurements, and future...Go to contribution page
-
Dr Romain PILARD (Teledyne e2v)19/06/2018, 16:00Other topicsOralTeledyne e2v has developed a new ADC to meet the high dynamic range as well as channel integration requirements of telecommunications payloads. It is a quad channel single core 12bit 1.5 GSPS designed by Teledyne e2v on ST Microelectronics BiCMOS9 technology which features 0.13µm CMOS and SiGeC NPN HBT bipolar technology (Ft/Fmax = 166/175GHz). The built-in Cross Point Switch (CPS) allows a...Go to contribution page
-
Dr Toshitsugu Sakamoto (NEC Corporation)19/06/2018, 16:25Custom cell-, circuit-, and system design of ICs for space applicationsOralThe Internet of Things (IoT) has been envisioned as a fundamental infrastructure that will bring about useful information and knowledge resulting in efficiency and growth in industry and improved comfort and safety in human life. Sensors, networks, and information technology (IT) are designated as key technology elements to make IoT a practical knowledge framework. IoT is to be used for...Go to contribution page
-
Mr Jorge Marin (KU Leuven)19/06/2018, 16:50Custom cell-, circuit-, and system design of ICs for space applicationsOralThe harsh environment of space mission applications is at the same time a growing field and a challenging playground for electronic sensor systems. The need of accurate and reliable information about several parameters such as structure sanity, turbine combustion and fuel tank state, among many others, requires sensor systems to be placed *in situ*. Thus, robust, reliable and accurate sensing...Go to contribution page