12th ESA Workshop on Avionics, Data, Control and Software Systems (ADCSS2018)
→
Europe/Amsterdam
Tennis Hall (Escape Building) (ESA/ESTEC)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1
2201 AZ Noordwijk
The Netherlands
Alain Benoit
(ESA-ESTEC),
Ali Zadeh
(ESA),
Joachim Fuchs
(ESA/ESTEC)
Description
The 12th ESA Workshop on Avionics, Data, Control and Software Systems (ADCSS) covers topics related to avionics for space applications, in the form of a set of round tables. The workshop acts as a forum for the presentation of position papers followed by discussion and interaction between ESA and Industry and between participants. Each theme part of ADCSS workshops will be first introduced and then expanded by presentations on related developments from technical and programmatic points of view. A round table discussion may follow, concluded by a synthesis outlining further actions and roadmaps for potential inclusion into ESA’s technology R&D plans.
Attendance to the workshop is free of charge. Registration is required via this website not later than October 14th, 2018.
All material presented at the workshop must, before submission, be cleared of any restrictions preventing it from being published on the ADCSS website.
For support please contact: Ms. Monique Hansen-Daniel or Mr. Davide Oddenino
-
-
08:00
→
09:00
Registration 1h Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The NetherlandsSpeakers: Kathleen Gerlo (ESA/ESTEC - Software Systems Division), Monique Hansen-Daniel -
09:00
→
09:20
Welcome 20m Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands -
09:20
→
09:30
Logistics 10m Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The NetherlandsSpeaker: Davide Oddenino (ESA-ESTEC) -
09:30
→
15:45
SAVOIR Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands- 09:30
-
10:00
FDIR Working Group 15mSpeakers: Alvaro Martinez Barrio (ESA), Marcel Verhoef (ESA), Mr Murray Kerr (Deimos)
- 10:15
- 10:30
-
11:00
Coffee Break 30m
-
11:30
AUTOCODE working group (automatic code generation) 30mSpeaker: Davide Oddenino (ESA-ESTEC)
-
12:00
FAIRE Working Group Report 30mSpeaker: Christophe HONVAULT (ESA)
-
12:30
Operability: OIRD and ECSS standards 30mSpeakers: Jean-Loup TERRAILLON (ESA), Joachim Fuchs (ESA/ESTEC)
-
13:00
Lunch Break (ESTEC Main Canteen) 1h
-
14:00
Update of SAVOIR documents 30mSpeaker: Torbjörn Hult (RUAG Space)
- 14:30
-
14:45
SAVOIR Roadmap for Model Based Avionics 30mSpeaker: Mr Sergio Feo Arenis (ESA/ESTEC)
-
15:15
Formal Approach to Information Modelling, PUS-C and SRDB 30mSpeakers: Mr Arnaud Bourdoux (SpaceBel), Mr Maxime Perrotin (ESA/ESTEC), Mr Michal Kurowski (SpaceBel), Serge Valera (ESA/ESTEC)
-
15:45
→
16:05
Coffee Break 20m Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands -
16:05
→
17:35
Reprogrammable FPGA Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands- 16:05
- 16:25
- 16:45
-
17:05
QUEENS (BRAVE FPGA tools quality assessment & improvements) 30mSpeaker: Mr David González Arjona (GMV)
-
17:35
→
18:05
Tool Vendors Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands -
18:05
→
19:30
Welcome Drink 1h 25m Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands
-
08:00
→
09:00
-
-
08:00
→
09:00
Registration 1h Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The NetherlandsSpeakers: Kathleen Gerlo (ESA/ESTEC - Software Systems Division), Monique Hansen-Daniel -
09:00
→
13:00
Command & Control Interfaces: status quo and medium/long term evolution Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands- 09:00
-
09:05
Need and Evolution of C&C 10mSpeaker: Mr Giorgio Magistrati (ESA/Data Systems Division)
-
09:15
ESA Programs Views 2h
- Science by Mr. P. Falkner (ESA/ESTEC)
- Launchers by Mr. I. Pardos (ESA/ESRIN)
- Exporlation by Mr. L. Bolognino (ESA/ESTEC)
- Earth Observation by Mr. J. Rosello (ESA/ESTEC)
-
11:15
Coffee Break 25m
-
11:40
Primes Views 1h
- Airbus Defence and Space by Mr. R. Roques
- Thales Alenia Space by Mr. B. Dellandrea
- Current Spacecraft Data Handling Interfaces and Future Needs at OHB by Mr. D. Felbach
-
12:40
Round Table and Wrap-Up 20mSpeaker: Dr Wahida Gasti (TEC-EDD)
-
13:00
→
14:00
Lunch Break (ESTEC Main Canteen) 1h
-
14:00
→
15:30
PYThON (Put Your Thesis ON) Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands- Introduction by Ms. Bénédicte Girouart (ESA/ESTEC)
- Diamond NV color center spin resonance magnetometers: from fundamentals to advanced operation principles by Mr. Jaroslav Hruby
- Experimental Validation of High Accuracy Pointing System by Mr. Francesco Sanfedino
- Optimising Engineering Design, Development and Verification Processes of Spacecraft Functional Avionics with MBSE Techniques by Mr. Joe Gregory
- T-REQS: Template-based requirements quality improvement in space engineering supported by an ontology-based requirements meta-model by Ms. Katharina Großer
- Analysis of the behaviour of single event counters aboard Sentinel 2A and 2B
by Mr. Patrick Hornung - Robust attitude control of spacecraft with sloshing dynamics by Mr. Anthony Bourdelle
- Reusable launcher guidance & control with active load prediction & relief by Mr. Pedro Simplicio
- Design Engineering Assistant for the Early Phases of Space Mission Design by Ms. Audrey Berquand & Mr. Francesco Murdaca
-
15:30
→
15:50
Coffee Break 20m Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands -
15:50
→
18:20
Interactive Session Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands-
15:50
Introduction 25m
- Session Introduction by Mr. J. Fuchs (ESA/ESTEC)
- Digital Engineering/Transformation by Mr. A. Mollier (Thales Alenia Space)
- Autonomy and Operations by Mr. A. Rossignol (Airbus Defence & Space)
- COTS Avionics by Mr. Ph. Armbruster (ESA/ESTEC)
- Security by Mr. K. Eckstein (ESA/ESTEC)
-
16:15
Town Hall Meeting: Discussion & Interaction 1h 30m
-
17:45
Wrap-Up & Conclusions 15m
-
15:50
-
08:00
→
09:00
-
-
08:00
→
09:00
Registration 1h Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The NetherlandsSpeakers: Kathleen Gerlo (ESA/ESTEC - Software Systems Division), Monique Hansen-Daniel -
09:00
→
12:30
MicroSat & NanoSat AOCS & GNC Avionics Architecture Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands-
09:00
Welcome 5mSpeaker: Ms Bénédicte Girouart (ESA/ESTEC)
-
09:05
MicroSat & NanoSat AOCS & GNC Avionics Architecture 25mSpeaker: Roger Walker (ESA)
-
09:30
The Attitude Control System on InnoSat - a versatile microsatellite platform developed for Swedish national scientific missions 30mSpeaker: Mr Per Bodin (OHB-Sweden)
-
10:00
PLATiNO Project: high performance integrated Avionics for a multi-mission mini-platform 30mSpeaker: Mr Alessandro Marini (Thales Alenia Space)
-
10:30
Advanced CubeSat Attitude Determination and Control: Towards arc second range pointing 30mSpeaker: Mr Tjorven Delabie (KU Leuven)
-
11:00
Coffee Break 30m
-
11:30
De-orbitation capsule avionics system: a small sat for re-entry 30mSpeaker: Mr Trevor Watts (Science and Technology)
-
12:00
QBITO 30mSpeaker: Mr Alvaro Bello (University of Madrid)
-
09:00
-
12:30
→
13:30
Lunch Break (ESTEC Main Canteen) 1h
-
13:30
→
16:35
Electronic Data Sheets (EDS) Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The Netherlands- 13:30
-
13:40
SAVOIR EDS Definition: Overview and Status 20mSpeaker: Marek Prochazka (ESA)
-
14:00
EDS Parser used for Generation of On-board Software 20mSpeakers: Mr Federico Cordero (Telespazio Vega Deutschland), Mr Michael Irvine (Telespazio Vega Deutschland), Mr Ran Qedar (SPiN/Telespazio Vega Deutschland)
-
14:20
How many EDS Formats do you need to plan a spacecraft? Possible ways towards standardization 20mSpeaker: Ms Diana Peters (DLR Jena)
-
14:40
Electronic data exchange in automotive 20mSpeaker: Mr Daniel Svensson (Volvo Cars)
-
15:00
Coffee Break 20m
-
15:20
EDS in practical use – benefits and drawbacks 20mSpeakers: Mr Falk Ahlendorf (Jeno-Optronik), Mr Rolf Hartmann (Jena-Optronik)
-
15:40
EDS for complex hardware units, what is needed and how do we generate them efficiently 20mSpeaker: Torbjörn Hult (RUAG Space)
-
16:00
Development of Electronic Data Sheets for Model-Based Systems Engineering 20mSpeakers: Mr Alberto Vaccarella (Spacejunkies V.O.F. (Satsearch)), Mr Kartik Kumar (Spacejunkies V.O.F. (Satsearch)), Mr N.P. Nagendra (Spacejunkies V.O.F. (Satsearch))
-
16:20
Wrap-Up 15mSpeaker: Marek Prochazka (ESA)
-
16:35
→
17:00
Conclusion ADCSS 2018 25m Tennis Hall (Escape Building)
Tennis Hall (Escape Building)
ESA/ESTEC
Keplerlaan 1 2201 AZ Noordwijk The NetherlandsSpeaker: Ali Zadeh (ESA)
-
08:00
→
09:00